Table of Contents
Advertisement
Making Internal Calls
"Hello, Neil and Buzz. I'm
talking to you by telephone
from the Oval Room at the
White House, and this
certainly has to be the most
historic telephone call ever
made." Richard Nixon
1969.
Making a Page Call
Page Call - Alias:
- Broadcast
- Zone paging.
INDeX - DT1 Phone Guide
The method below uses normal dialling to make internal calls.
To dial an internal call:
1. Dial the extension number. A triple-tone means that the extension
called is diverting calls to an external number (DT-3/4/5 phones).
2. If unanswered, the DT1 provides options to wait or notify the
extension you called (see page 12).
3. If answered, either pickup the handset or continue the call
handsfree. During the call, the DT1 provides a range of further
actions (see page 14).
4. To end, dial ANSWER RELEASE or replace the handset.
You can page any INDeX DT or TT phone or group of such phones.
They hear the call without doing anything though you cannot hear them.
If wanted, they can turn the page into a normal call (see page 16). If the
phone paged is diverting calls, the page also diverts (except group
pages).
To page an extension or group:
1. Dial FEATURE 4.
2. Pickup the handset or continue handsfree.
3. Dial the extension or group number.
4. If the extension is busy or set to No Calls, you can wait or leave a
message (see page 12).
5. Speak and then dial ANSWER RELEASE.
Making Calls – Page 9
38GDE00001SAC - Issue 4 (January 1999)
Advertisement
Table of Contents
