Answering Calls - Lucent Technologies INDEX DT1 User Manual

Page 16

Answering Calls

Answering Normal Calls
"Phone call from God ... if it
had been collect, it would
have been daring" Robin
Williams (Dead Poet
Society)
Answering a Page Call
Answering a Call Waiting
Answering a Message
INDeX - DT1 Phone Guide
When calls arrive, the phone lamp gives a repeated double flash for
external calls, a repeated single flash for internal calls. The ringer also
shows the call type by a repeated single or double ring if on (see page
23).
To answer the call:
1. Dial ANSWER RELEASE or lift the handset.
2. During the call, you can take a range of actions (see page 14).
3. To end, dial ANSWER RELEASE or replace the handset.
When someone pages your DT1 (see page 9) or a group to which it
belongs (your DT1 does not have to be in group), the system connects
the page after giving a tone. You can hear the page but they cannot
hear you. If you answer a page it turns into a normal call.
To answer a page:
1. Dial ANSWER/RELEASE. Pickup the handset or continue the call
handsfree.
A fast flashing lamp during a call means someone has 'camped on' to
your DT1 (see page 13).
To answer a call waiting:
1. Either park (dial FEATURE 7 ) or end (dial ANSWER RELEASE)
your current call.
2. The waiting call rings your DT1. Dial ANSWER RELEASE and
continue as a normal call.
Other extensions can leave their number on your DT1 (see page 12).
Your DT1 can store five such messages. When you have a message
the DT1's lamp comes on. If your system has a Voice Manager
attached, it lights the DT1's lamp when you have new voice mail (see
page 27).
To answer a message:
1. Without lifting the handset, dial FEATURE 0.
To cancel a message:
1. Without lifting the handset, dial FEATURE 6 4.
38GDE00001SAC - Issue 4 (January 1999)