While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Lucent Technologies can assume no responsibility for any errors. Changes or corrections to the information contained in this document may be incorporated into future issues.
Page 3
For accessing the built-in speakerphone and microphone combination. Message light — A red light that flashes when a message has been left for you or when a call is coming in (that is, when the telephone is ringing). This light is labeled Dial pad —...
Do not plug the handset cord into the line jack or the data jack on your telephone since it could damage your handset and the telephone. 1. Turn the telephone upside down so that you can see the bottom of the telephone. See Figure 2. Desktop stand Figure 2.
9. Place the telephone against the wall jack mount and push down so that the base locks into the slots on the telephone. 10. Plug the free end of the coiled handset cord into the handset and hang up the handset.
Page 6
• You can use the Pause button to program a 1.5-second pause between a dialing access number, such as 9, and the telephone number, and for certain banking and long-distance services. • For example, to put a pause between the dialing access number, 9, and the telephone number, press the Pause button, then 12125551234.
(or original shipping receipt), and description of the operating problem. After replacing your telephone, Lucent Technologies will ship it to you at no cost to you.