Auto Standby; Front Display; Information - Denon AVR-X2000 Owner's Manual

Contents

Auto Standby

When you do not perform any operation on this unit with no audio or video
input for a specified time, this unit automatically enters the standby mode.
Before it enters the standby mode, "Auto Standby" is displayed on the
display of this unit and the menu screen.
60 min : The unit goes into standby after 60 minutes.
30 min : The unit goes into standby after 30 minutes.
Off (Default) : The unit does not go into standby automatically.

Front Display

Makes settings related to the display on this unit.
2 Dimmer
Adjust the display brightness of this unit.
Bright (Default) : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
Off : Turns the display off.
%
• You can also adjust the display by turning DIMMER on the main unit.
Front panel Display
Connections Playback
Rear panel
Settings

Information

Show information about receiver settings, input signals, etc.
2 Audio
Show the audio information for MAIN ZONE.
Sound Mode : The currently set sound mode.
Input Signal : The input signal type.
Format : The number of input signal channels (presence of front,
surround, LFE).
Sample Rate : The input signal's sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround
back channel. "MATRIX" is displayed with Dolby Digital EX
and DTS-ES Matrix signals, "DISCRETE" with DTS-ES Discrete
signals.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.
It automatically corrects the standard signal level for individual
program sources.
The correction value can be checked using the STATUS on the main
unit.
The figure is the corrected value. This cannot be changed.
167
Remote
Tips Appendix
Offset: - 4dB
Index