Denon AVR-X2000 Owner's Manual page 170

Contents
2 Notifications
When the latest firmware is available, a notification message is
displayed on the TV screen at power on.
Update
On (Default) : Display update message.
Off : Do not display update message.
Upgrade
The notification message is displayed for about 20 seconds when the
power is turned on. Connect to broadband Internet (vpage 40)
when using this function.
On (Default) : Display upgrade message.
Off : Do not display upgrade message.
Front panel Display
Connections Playback
Rear panel
Settings
2 Add New Feature
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade Package : Display the items to be upgraded.
Upgrade Status : Display a list of the additional functions provided by
the upgrade.
Upgrade Start : Execute the upgrade process. When the upgrade
starts, the menu screen is shut down. During the
upgrade, the amount of upgrade time which has
elapsed is displayed.
%
• See the Denon website for details about upgrades.
• When the procedure is complete, "Registered" is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, "Not
Registered" is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main unit's
TUNER PRESET CH – and STATUS for at least 3 seconds.
• If the upgrade is not successful, an error message identical to those in
"Update" will appear on the display. Check the settings and network
environment and then perform the upgrade again.
170
Remote
Tips Appendix
Index