Tone; Restorer - Denon AVR-X2000 Owner's Manual

Contents

Tone

Adjust the tonal quality of the sound.
2 Tone Control
Set the tone control function to "On" and "Off".
On : Allow tone adjustment (bass, treble).
Off : Playback without tone adjustment.
2 Bass
Adjust bass.
–6dB – +6dB
2 Treble
Adjust treble.
–6dB – +6dB
%
• This cannot be set when the sound mode is set to "DIRECT" or "PURE
DIRECT".
Front panel Display
Connections Playback
Rear panel
Settings

Restorer

Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The "Restorer"
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
2 Mode
High : Optimized mode for compressed sources with very weak highs
(64 kbps and under).
Medium : Apply suitable bass and treble boost for all compressed
sources (96 kbps and under).
Low : Optimized mode for compressed sources with normal highs (96
kbps and over).
Off : Do not use "Restorer".
%
• This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
• "Restorer" settings are stored for each input source.
• This item default setting for "NETWORK" and "iPod/USB" is "Low". All
others are set to "Off".
• This cannot be set when the sound mode is set to "DIRECT" or "PURE
DIRECT".
131
Remote
Tips Appendix
Index