Graphic Eq - Denon AVR-X2000 Owner's Manual

Contents

Graphic EQ

Use the 9 band graphic equalizer to adjust the tone of each speaker.
%
• "Graphic EQ" can be set when "MultEQ® XT" (vpage 133) setting is "Graphic
EQ".
• Speakers for which "Graphic EQ" can be set differ according to the sound mode.
2 Speaker Selection
Select whether to adjust tones for individual speakers or for all
speakers.
All
Left/Right (Default)
Each
2 Adjust EQ
Adjust tonal balance for each frequency band. Adjust the speaker
selected in "Speaker Selection".
q Select the speaker.
w Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
e Adjust the level.
–20.0dB – +6.0dB (Default : 0.0dB)
Front panel Display
Connections Playback
Rear panel
Settings
2 Curve Copy
Copy "Audyssey Flat" curve from "MultEQ® XT" (vpage 133).
%
• "Curve Copy" is displayed after Audyssey® Setup has been performed.
2 Set Defaults
The "Graphic EQ" settings are returned to the default settings.
135
Remote
Tips Appendix
Index