Sleep Timer Function; Using The Sleep Timer - Denon AVR-X2000 Owner's Manual

Contents

Sleep timer function

MAIN
ZONE2
Front panel Display
Connections Playback
SLEEP
Rear panel
Settings
You can have the power automatically switched to standby once a set
time has elapsed. This is convenient for viewing and listening while going
to sleep.
The sleep timer function can be set for each zone.

Using the sleep timer

1
Press MAIN or ZONE2 to switch the zone mode.
The button for the selected zone is lit.
2
Press SLEEP and display the time you want to set.
• The SLEEP indicator on the display lights.
• You can set the sleep timer in the range from 10 to 120 minutes
in steps of 10 minutes.
2 To cancel the sleep timer
Press SLEEP to set "Off".
The SLEEP indicator on the display turns off.
%
• The sleep timer is also cancelled when this unit is set to the standby mode or the
MAIN ZONE or ZONE2 power is turned off.
NOTE
• The sleep timer function cannot turn off the power of devices connected to this
unit. To turn off the power of those connected devices, set up sleep timers on the
connected devices themselves.
111
Remote
Tips Appendix
Index