Shooting With Manual Flash - Pentax KC-01 Operating Manual

Shooting with Manual Flash

Discharges the flash for each picture.
1
Set the flash mode to E or F.
2
Press the K/i button.
The built-in flash pops up and begins
charging.
When you do not want the flash to
discharge, keep the built-in flash
retracted.
3
Press the shutter release button fully.
The flash discharges and the picture is taken.
4
Push down on the top of the flash
in the direction indicated in the
illustration to retract the built-in
flash.
• When the mode dial is set to a (Flash Off), the built-in flash will not pop up
even if the K/i button is pressed.
• By default, you cannot take pictures while the built-in flash is being charged.
If you want to take pictures while charging the built-in flash, set [12. Release
While Charging] (p.72) to [On] in the [A Custom Setting 2] menu.
63
3