Pentax KC-01 Operating Manual page 248

Table of Contents

Advertisement

246
Error Message
Not enough battery
power remaining to
update the firmware
Unable to update firmware.
There is a problem with the
firmware update file
Image folder cannot be
Unable to store image
Settings not stored
The operation could not be
completed correctly
No more images can be
No image can be processed
This image cannot be
processed
The camera failed to create
10
This function is not available
in the current mode
The camera will turn off
to prevent damage from
overheating
created
selected
an image
Description
Appears when trying to update the firmware if the
battery level is insufficient. Install a fully charged
battery, or use the AC Adapter kit K-AC1202
(optional). (p.42)
Unable to update the firmware. The update file is
damaged. Try downloading the update file again.
(p.197)
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.199)
The image could not be saved because of an SD
Memory Card error.
The DPOF settings could not be saved because
the SD Memory Card is full. Delete unwanted
images and perform the DPOF setting again.
(p.163)
The camera was unable to measure the manual
white balance (p.132) or use HDR Capture
(p.135). Try the operation again.
You cannot select 100 or more images at a time
for Index (p.172) and Select & Delete (p.163).
There are no images that can be processed
using the Digital Filter (p.167) or RAW
Development (p.174) function.
Appears when you try to perform Resize (p.165),
Cropping (p.166), Digital Filter (p.167), or RAW
Development (p.174) for images captured with
other cameras, or when you try to perform Resize
or Cropping for minimum file size images.
The creation of an index print image failed.
(p.172)
You are trying to set a function that is not
available in n, H or C mode.
The camera will turn off because its internal
temperature gets too hot. Leave the camera
turned off and give it enough time to cool down.
Turn it on again after a while.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K-01

Table of Contents