Pentax KC-01 Operating Manual page 55

6
Press the four-way controller (3)
to select [Settings complete], and
press the 4 button.
The camera is ready to take a picture.
If you set the date and time from the
menu, the [R Set-up 1] menu reappears.
In this case, press the 3 button.
Pressing the 3 button while setting the date and time cancels the settings
made up to that point and switches the camera to capture mode. After initial
settings are complete, if the camera power is turned off before the date and
time settings are complete, the [Date Adjustment] screen will appear the next
time you turn the camera on. You can set the date and time from the menu
later. (p.187)
• When you press the 4 button in Step 6, the seconds value is set to 0. To
set the exact time, press the 4 button when the time signal (on the TV,
radio, etc.) reaches 0 seconds.
• You can change the language and date and time settings from the menu.
(p.187, p.190)
Date Adjustment Date Adjustment
Date Format Date Format mm/dd/yy 24h mm/dd/yy
Date Date
0 2 / 0 2 / 2 0 1 2 0 2 / 0 2 / 2 0 1 2
Time Time 10:00 10:00
Settings complete Settings complete
Cancel Cancel
MENU
53
24h
OK OK
OK
2