Page 1 SLR Digital Camera Operating Manual For optimum camera performance, please read the Operating Manual before using the camera.
Page 2 Copyright Act, and care should be taken here also. Regarding trademarks PENTAX and smc PENTAX are trademarks of PENTAX Corporation. SD logo and SDHC logo are trademarks. This product includes DNG technology under license by Adobe Systems Incorporated.
Page 3: For Using Your Camera Safely
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the batteries or the AC adapter, and contact your nearest PENTAX Service Center. Continued use could cause a fire or electric shock.
Page 4: Precautions For Battery Usage
Caution • Do not short the batteries or dispose of the batteries in fire. Do not disassemble the batteries. The batteries could explode or catch fire. • Of the batteries that can be used in this camera (AA Ni-MH batteries, AA lithium batteries and AA alkaline batteries), only the Ni-MH batteries can be recharged.
Page 5 • Use a lens brush to remove dust accumulated on the lens or viewfinder. Never use a spray blower for cleaning as it may damage the lens. • Please contact PENTAX Service Center for professional cleaning of the CCD. (This will involve a fee.) •...
Page 6 Regarding Product Registration In order to better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or on the PENTAX website. Thank you for your cooperation. Refer to the PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 Operating...
Page 7: Table Of Contents
Contents FOR USING YOUR CAMERA SAFELY ...1 ABOUT THE CAMERA...1 PRECAUTIONS FOR BATTERY USAGE ...2 Care to be Taken During Handling ...2 Contents ...5 Composition of the Operating Manual ...11 Before Using Your Camera x Camera Characteristics ... 14 Checking the Contents of the Package... 16 Names and Functions of Working Parts ...
Page 8 Basic Operations Basic Shooting Operation ... 56 Holding the Camera...56 Letting the Camera Choose the Optimal Settings ...57 Using a Zoom Lens ... 61 Using the Built-in Flash ... 62 Taking Pictures Using the Shake Reduction Function... 67 Turning On the Shake Reduction Function...68 Setting the Shake Reduction Function ...69 Playing Back Still Pictures ...
Page 9 Checking the Composition, Exposure and Focus Before Shooting ... 112 Selecting the Preview Method ...112 Displaying the Preview ...113 Continuous Shooting... 115 Self-Timer Shooting ... 117 Remote Control Shooting (Remote Control F: Sold Separately) ... 120 Using Mirror Up Function to Prevent Camera Shake ... 123 Changing the Shooting Conditions Automatically when Shooting (Auto Bracket)...
Page 10 Playback Functions How to Operate the Menus During Playback... 158 [Q Playback] Menu Setting Items ...158 [A Custom Setting] Menu Setting Items...158 Playback Fn Menu Setting Items ...159 Rotating Images ... 160 Enlarging Playback Images ... 161 Displaying Multiple Images ... 163 Displaying a Folder ...
Page 11 Camera Settings How to Operate the [R Set-up] Menu ... 202 [R Set-up] Menu Setting Items...202 Formatting the SD Memory Card ... 203 Setting the Beep Setting, Date and Time, and Display Language ... 204 Turning the Beep On and Off...204 Changing the Date and Time and the Display Style ...205 Setting the World Time ...206 Setting the Display Language...209...
Page 12 Appendix Default Settings... 224 Functions Available with Various Lens Combinations ... 228 Notes on [23. Using Aperture Ring] ... 230 Cleaning the CCD... 231 Removing Dust by Shaking the CCD...231 Detecting Dust on the CCD (Dust Alert) ...231 Removing Dust with a Blower...233 Optional Accessories ...
Page 13: Composition Of The Operating Manual
Composition of the Operating Manual This Operating Manual contains the following chapters. 1 Before Using Your Camera Explains camera characteristics, accessories and the names and functions of various parts. 2 Getting Started Explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions.
Page 14 The symbols used in this Operating Manual are explained below. Shows reference page number explaining a related operation. Shows useful information. Shows precautions to take when operating the camera.
Page 15: Before Using Your Camera
Before Using Your Camera Check the package contents and names and functions of working parts before use. x Camera Characteristics ...14 Checking the Contents of the Package ...16 Names and Functions of Working Parts ...17 Display Indicators ...22 How to Operate the Menu ...30 Using the Mode Dial ...32 When using menus and Fn menu, items which cannot be changed due to camera settings appear gray and cannot be selected.
Page 16: Camera Characteristics
x Camera Characteristics • Features a 23.5×15.7 mm CCD with approximately 10.2 million effective pixels for high precision and a wide dynamic range. • Features Shake Reduction (SR), an image sensor shifting shake reduction system. This enables you to capture sharp pictures with minimal camera shake regardless of the lens type.
Page 17 Focal length is equivalent to a 450 mm lens on a 35 mm camera. Shake Reduction (SR) Shake Reduction (SR) on the x features a PENTAX original system which uses magnetic force to move the image sensor at high speeds, compensating camera shake.
Page 18: Checking The Contents Of The Package
Software (CD-ROM) S-SW74 Operating Manual (this manual) Eyecup F (Installed on camera) USB cable I-USB17 Strap O-ST53 Quick Guide ME Viewfinder cap Video cable I-VC28 Four AA lithium batteries (2 packs) PENTAX PHOTO Browser 3/ PENTAX PHOTO Laboratory 3 Operating Manual...
Page 19: Names And Functions Of Working Parts
Names and Functions of Working Parts Camera Self-Timer lamp/ Remote control receiver Card cover Lens mount index (red dot) Lens unlock button Diopter adjustment lever Built-in Flash Cable switch terminal USB/Video terminal DC input terminal Terminal cover Tripod socket Battery grip connector terminal * In the illustrations above, the back and bottom sides of the camera are shown with the Eyecup F...
Page 20: Capture Mode
Capture Mode Functions of buttons, dials and levers used during shooting are noted. The factory default settings are explained here. Depending on the button or dial, these settings can be changed in the [A Custom Settings] menu (p.75). 1 Green button Sets the Exposure mode to Automatic Exposure (p.88, p.96) and resets the settings...
Page 21: Mode Dial
5 mc button Sets the EV compensation and aperture value. (p.87, p.94, p.100) 6 | button Changes the file format temporarily. Press to switch to RAW+ (saves both JPEG and RAW files). (p.149) 7 Focus mode lever Switches between autofocus mode (p.102) and manual focus mode (p.109).
Page 22: Playback Mode
Playback Mode Functions of buttons, dials and levers used during playback are noted.
Page 23: Shutter Release Button
1 Shutter release button Press halfway to switch to Capture mode. 2 Main switch Move to turn the camera on and off. (p.48) Set to the | position to switch to Capture mode and preview. 3 mc button Press in Enlarged view to increase the magnification.
Page 24: Display Indicators
Display Indicators Monitor The following indicators appear on the monitor depending on the status of the camera. At Start-up or when Operating the Mode Dial Guides appear on the monitor for 3 seconds (default setting) when the camera is switched on or the mode dial is turned. Select Off for [Guide display] in [R Set-up] menu to not show indicators.
Page 25 Capture Mode Press the M button in Capture mode to display the capture function settings on the monitor for 30 seconds. Press the four-way controller (23) while displayed to switch to explanation of set Shooting mode. Detailed information display 1 / 2 0 0 0 1 / 2 0 0 0 1 / 2 0 0 0 F 2 .
Page 26 Explanation of Shooting Mode Capture mode (p.32) Capture mode explanation Button/dial guide For capturing moving For capturing moving For capturing moving pets pets pets -- -- -- RAW+ RAW+ RAW+ -- -- -- Show Sensitivity Show Sensitivity Show Sensitivity...
Page 27 Playback Mode Every time you press the M button during playback, the camera switches screen displays in the following order: Standard display, Histogram display, Detailed information display and No information display (image only). You can change the information initially displayed by pressing the Q button. Detailed information display 1 / 2 0 0 0 1 / 2 0 0 0...
Page 28 Histogram Display The x features two histogram displays. The “Brightness histogram” shows the distribution of brightness and the “RGB histogram” shows the distribution of color intensity. Press the four-way controller (23) to switch between “Brightness histogram” and “RGB histogram”. Brightness histogram File Format Folder No./File No.
Page 29: Viewfinder
Viewfinder The following information appears in the viewfinder. AF frame (p.47) Spot metering frame (p.98) AF point (p.105) Flash status (p.62) Lit: when flash is available. Blinks: when flash is recommended but not set. Focus mode (p.102) Appears when AF Mode is set to k (Continuous mode) or \. Picture/Scene mode icon (p.78) Icon for Picture mode or Scene mode in use appears.
Page 30 Focus indicator (p.58) Lit: when image is focused. Blinks: when the subject is not in focus. AE lock (p.101) Appears during AE lock. Number of recordable images/EV compensation/Sensitivity Displays the number of recordable images with current quality and recorded pixel setting. The difference from the appropriate exposure value appears if exposure mode is a.
Page 31: Lcd Panel
LCD Panel The following information appears in the LCD panel on top of the camera. Shutter speed (p.81) Aperture (p.82) White balance (p.150) (Not displayed when set to Auto) : White balance correction Battery level Flash mode (p.62) : Built-in flash is ready (when blinking, flash should be used) : Flash off...
Page 32: How To Operate The Menu
How to Operate the Menu This section explains operation methods for [A Rec. Mode] menu, [Q Playback] menu, [R Set-up] menu and [A Custom Setting] menu. Displaying the Menu screen Press the 3 button in Capture mode. The [A Rec. Mode] menu appears on the monitor.
Page 33 Selecting and Setting a Menu Item Procedure to set the [JPEG Quality] on the [A Rec. Mode] menu is explained as an example. Use the four-way controller (23) to choose an item. Press the four-way controller (5). Quality levels available when recording in JPEG format are displayed.
Page 34: Using The Mode Dial
Using the Mode Dial You can switch the Capture mode by setting the icons on the mode dial to the dial indicator. Mode I (Auto Picture) (Portrait) (Landscape) (Macro) (Moving Object) (Night Scene Portrait) (Flash OFF) H (Scene) For . (Night Scene Portrait), the shutter speed becomes slower in dark places, even if the built-in flash is used.
Page 35 Mode Automatically sets shutter speed and aperture e (Program) to the proper exposure according to Program line when taking pictures. Automatically sets the shutter speed and K (Sensitivity Priority) aperture to the proper exposure according to the set sensitivity. Lets you set the desired shutter speed to freeze or emphasize subject movement.
Page 36 Memo...
Page 37: Getting Started
Getting Started This chapter explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions. Attaching the Strap ...36 Inserting the Batteries ...37 Inserting/Removing the SD Memory Card ...41 Attaching the Lens ...45 Adjusting the Viewfinder Diopter ...47 Turning the Camera On and Off ...48 Initial Settings ...49...
Page 38: Attaching The Strap
Attaching the Strap Pass the end of the strap through the strap lug, then secure it on the inside of the clasp. Pass the other end of the strap through the other strap lug on the camera, then secure it on the inside of the clasp.
Page 39: Inserting The Batteries
Inserting the Batteries Insert batteries into the camera. Use four AA lithium batteries, AA Ni-MH batteries, or AA alkaline batteries. This camera is packaged with AA lithium batteries for checking the camera functionality but some other kinds of batteries are also compatible. Use the compatible batteries according to the intended purpose.
Page 40: Battery Level Indicator
Insert the batteries according to the +/– indicators in the battery chamber. Press down on the batteries with the battery cover (1) and slide it as shown in the illustration (2) to close. Be sure to fully close the battery cover. The camera will not turn on if the battery cover is open.
Page 41: Approximate Image Storage Capacity And Playback Time (New Batteries)
The picture storage capacity (normal recording and flash use 50%) is based on measuring conditions in accordance with CIPA standards and the others are based on PENTAX measuring conditions. Some deviation from the above figures may occur in actual use depending on shooting mode and shooting conditions.
Page 42: Using The Ac Adapter (Optional)
Using the AC Adapter (Optional) We recommend using the AC adapter D-AC76 (optional) when using the monitor for a long time or when connecting to your PC. Make sure the camera is turned off before opening the terminal cover. Connect the DC terminal on the AC adapter to the DC input terminal on the camera.
Page 43: Inserting/Removing The Sd Memory Card
Inserting/Removing the SD Memory Card This camera uses either an SD Memory Card or an SDHC Memory Card. (Both cards are referred to as SD Memory Cards hereafter.) Make sure the camera is turned off before inserting or removing the SD Memory Card (market product). •...
Page 44 • Data on the SD Memory Card may be deleted in the following circumstances. PENTAX does not accept any liability for data that is deleted if (1) the SD Memory Card is mishandled by the user. (2) the SD Memory Card is exposed to static electricity or electrical interference.
Page 45: Recorded Pixels And Quality Level
Recorded Pixels and Quality Level When the File Format is JPEG Choose the number of pixels (size) and quality level (JPEG data compression rate) of pictures according to how you intend to use the pictures you have taken. Pictures with larger recorded pixels or more Es are clearer when printed. The number of pictures that can be taken (the number of pictures that can be recorded on an SD Memory Card) decreases with larger file sizes.
Page 46 With x, you can record in the versatile JPEG format or the high quality and editable RAW format. For RAW file format, you can select the PENTAX original PEF format or general-purpose DNG (Digital Negative) format designed by Adobe Systems. On a 1 GB SD Memory Card, you can record up to 58 images in PEF format or DNG format.
Page 47: Attaching The Lens
Attaching the Lens All camera exposure modes are available when using DA, D FA, FA J or other lenses with an Aperture s (Auto) position. Some functions are restricted when lenses are not set to the Aperture s position. Also see “Notes on [23.
Page 48 Remove the front lens cap by pushing the indicated portions inward. To detach the lens, hold down the lens unlock button (3) and turn the lens counterclockwise. • The body mount cover (1) is a cover to prevent scratches and block dust when shipped.
Page 49: Adjusting The Viewfinder Diopter
Adjusting the Viewfinder Diopter Adjust the viewfinder to suit your eyesight. If it is difficult to see the viewfinder image clearly, slide the diopter adjustment lever sideways. You can adjust the diopter from approximately –2.5 to +1.5 m Look through the viewfinder and point the camera at a white wall or other bright and consistent surface.
Page 50: Turning The Camera On And Off
Turning the Camera On and Off Move the main switch to [ON] position. The camera will turn on. Move the main switch to [OFF] position to turn off the camera. • Always turn the camera off when not in use. •...
Page 51: Initial Settings
Initial Settings The first time the camera is turned on after purchasing, the [ Language/ appears on the monitor. Follow the procedure below to set the language displayed on the monitor and the current date and time. Once setting is done, these will not need to be set again when turning your camera on.
Page 52 Press the four-way controller (3). The cursor moves to Press the four-way controller (5). The [ Hometown] screen appears. Use the four-way controller (45) to select the city. Press the four-way controller (3). The cursor moves to [DST] (daylight saving time). Use the four-way controller (45) to select O (On) or P (Off).
Page 53 When an Incorrect Language is Set When you mistakenly select a language in the [Language/ and proceed to the [Date Adjust] screen, you can perform the following operations to set the correct language. If you have proceeded to switch the camera to Capture mode (and the camera is ready to take a picture), perform the following operations from Step 2 to set the correct language.
Page 54: Setting The Date And Time
Setting the Date and Time Set the current date and time and the display style. Press the four-way controller (5). The frame moves to [mm/dd/yy]. Use the four-way controller (23) to choose the date style. Press the four-way controller (5). The frame moves to [24h].
Page 55 Press the four-way controller (5). The frame moves to the month. Use the four-way controller (23) to set the month. Set the day and year in the same manner. Next, set the time. If you select [12h] in Step 4, the setting switches between am and pm depending on the time.
Page 56 Memo...
Page 57: Basic Operations
Basic Operations This chapter explains basic operations for shooting by setting mode dial to I (Auto Picture) to ensure successful capturing. For information about advanced functions and settings for taking pictures, refer to chapter 4 and onward. Basic Shooting Operation ...56 Using a Zoom Lens ...61 Using the Built-in Flash ...62 Taking Pictures Using the Shake Reduction...
Page 58: Basic Shooting Operation
Basic Shooting Operation Holding the Camera How you hold the camera is important when taking pictures. • Hold the camera firmly with both hands. • Press the shutter release button gently when taking a picture. Horizontal position • To reduce camera shake, support your body or the camera on a solid object such as a table, tree, or wall.
Page 59: Letting The Camera Choose The Optimal Settings
Letting the Camera Choose the Optimal Settings The x features various Capture modes, Focus modes, and Drive modes suited for your intentions. This section explains how to take pictures by simply pressing the shutter release button. Set the mode dial to I. The camera will select the optimal capture mode for the subject.
Page 60 Look through the viewfinder to view the subject. A zoom lens can be used to change the size of the subject in the viewfinder. 1Using a Zoom Lens (p.61) Position the subject inside the AF frame and press the shutter release button halfway.
Page 61: The Monitor
Review the captured image on the monitor. Image appears for 1 second on the monitor after capturing (Instant Review). 1 Setting the Instant Review (p.211) 1 Histogram Display (p.211) 1 Bright/Dark Area Display (p.211) You can magnify the image during Instant Review with the e-dial.
Page 62: Subjects That Are Difficult To Focus On
Subjects that are Difficult to Focus on The autofocus mechanism is not perfect. Focusing may be difficult when taking pictures under the following conditions ((a) to (f) below). These also apply to manual focusing using the focus indicator ] in the viewfinder. If the subject cannot be focused automatically, set the focus mode lever to \ and use the manual focus mode to focus on the subject with the aid of the matte field in the viewfinder.
Page 63: Using A Zoom Lens
Using a Zoom Lens Enlarge the subject (telephoto) or capture a wider area (wide angle) with a zoom lens. Adjust the subject to the desired size and take the picture. Turn the zoom ring to the right or left. Turn the zoom ring clockwise for telephoto and counterclockwise for wide angle.
Page 64: Using The Built-In Flash
Using the Built-in Flash Use the following procedures to take a picture in low light or backlit conditions or when you want to manually use the built-in flash. The built-in flash is optimum at about 0.7 m to 5 m from the subject. Exposure will not be properly controlled and vignetting may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the lens being used and set sensitivity (p.132)).
Page 65: Selecting Flash Mode
Selecting Flash Mode Press the { button. The Fn menu appears. Press the four-way controller (3). The [Flash Mode] screen appears. AUTO AUTO AUTO Exit Exit Exit Flash Mode Flash Mode Flash Mode Auto discharge Auto discharge Auto discharge 0 . 0 0 .
Page 66 Use the four-way controller (45) to choose a flash mode. Turn the e-dial to perform Flash exposure compensation. (p.128) When the mode dial is set to e, K, b, c, a or p, g and i appear gray and cannot be selected. Press the 4 button.
Page 67 Press the shutter release button fully. The picture is taken. Push down on the portion indicated in the illustration to retract the flash. Using Flash On Mode Press the K button. The built-in flash pops up and begins charging. Flash On mode is used regardless of the flash mode settings.
Page 68 Using Red-eye Reduction Flash “Red-eye” is the phenomenon where eyes look reddish in photographs taken in dark environments with a flash. This is caused by the reflection of the electronic flash in the retina of the eye. Red-eye occurs because pupils are dilated in dark environments.
Page 69: Taking Pictures Using The Shake Reduction Function
Taking Pictures Using the Shake Reduction Function You can easily take sharp pictures using the Shake Reduction function by simply turning on the Shake Reduction switch. Shake Reduction The Shake Reduction function reduces camera shake that occurs when the shutter release button is pressed. This is useful for taking pictures in situations where camera shake is likely to occur.
Page 70: Turning On The Shake Reduction Function
The camera is ready to take pictures when k appears in the viewfinder. • Shake Reduction is available with any x compatible PENTAX lens. However, when the aperture ring is set at other than the s (Auto) position or a lens without an s position is used, the camera does not operate unless [23.
Page 71: Setting The Shake Reduction Function
Setting the Shake Reduction Function The [Input Focal Length] setting menu appears when the camera is turned on with the Shake Reduction switch on and a type of lens that does not support automatic acquisition of lens information such as focal length (p.67) is mounted.
Page 72: Playing Back Still Pictures
Playing Back Images You can play back captured still pictures with the camera. Use the included “PENTAX PHOTO Browser 3” software to play back using a PC. Refer to the “PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 Operating Manual” for details.
Page 73 Press the four-way controller (45). 4 : The previous image appears. 5 : The next image appears. Refer to “Playback Functions” (p.157) for playback mode details.
Page 74: Deleting Images
Deleting Images Deleting a Single Image You can delete one image at a time. • Deleted images cannot be restored. • Protected images cannot be deleted. Press the Q button and use the four-way controller (45) to select an image to delete. Press the i button.
Page 75: Shooting Functions
Shooting Functions This chapter describes the various basic and advanced shooting functions available with the x. How to Operate the Shooting Menus ...74 Selecting the Appropriate Capture Mode for Scenes ...78 Setting the Exposure ...81 Focusing ...102 Checking the Composition, Exposure and Focus Before Shooting ...112 Continuous Shooting ...115 Self-Timer Shooting ...117...
Page 76: How To Operate The Shooting Menus
How to Operate the Shooting Menus Press the 3 button in Capture mode. The [A Rec. Mode] menu appears. [A Rec. Mode] Menu Setting Items Perform settings related to capturing in the [A Rec. Mode] menu. Item AF Mode AE Metering Select AF point File Format JPEG Recorded...
Page 77: [A Custom Setting] Menu Setting Items
[A Custom Setting] Menu Setting Items Set custom functions to fully use the functions of a SLR camera with the Custom Setting Menu. The default setting does not change custom function. The [A Custom Setting] menu settings are activated when [Setting], the first item, is O (On).
Page 78 Item 14. Green button in Manual 15. Release when Charging 16. Flash in Wireless Mode 17. WB when using flash 18. Preview Method 19. Display Sensitivity 20. Saving rotation info 21. Auto Image Rotation 22. Catch-in focus 23. Using aperture ring Reset Custom Function...
Page 79: Shooting Fn Menu Setting Items
Shooting Fn Menu Setting Items Press the { button in Capture mode. The Fn menu appears. Press the four-way controller (2345) or the 4 button to set the operation. Key or Item Button Drive Mode Flash Mode White Balance Sensitivity Custom Image Function Selects Continuous shooting, Self-...
Page 80: Selecting The Appropriate Capture Mode For Scenes
Selecting the Appropriate Capture Mode for Scenes Select = (Portrait), s (Landscape), q (Macro), \ (Moving Object), . (Night Scene Portrait), a (Flash OFF), H (Scene) with the mode dial if desired image is not captured in I (Auto Picture) mode. The characteristics of the modes are as follows.
Page 81: Selecting The Shooting Scene
Selecting the Shooting Scene By setting the mode dial to H (Scene), you can choose from the following 8 shooting scenes. Mode Used for night scenes. Use a tripod, etc. to prevent A (Night Scene) shaking. For capturing images of dazzling backgrounds, such as i (Surf &...
Page 82 Press the 4 button. The mode palette appears. Use the four-way controller (2345) to choose a Scene mode. Press the M button to display the custom image and use the four-way controller (45) to change the scene. Settings, such as those for Image Tone, cannot be changed.
Page 83: Setting The Exposure
Setting the Exposure Effect of Aperture and Shutter Speed Correct exposure of the subject is determined by the combination of shutter speed and aperture setting. There are many correct combinations of shutter speed and aperture for a particular subject. Different combinations produce different effects.
Page 84: Depth Of Field
Effect of Aperture Adjust the amount of light hitting the CCD by changing the aperture. Opening the aperture (reduce the aperture value) Objects closer and farther than the focused subject will be more out of focus. For instance, if you take a picture of a flower against a landscape with the aperture open, the landscape in front and behind the flower will be blurred, emphasizing only the flower.
Page 85: Setting The Sensitivity
Setting the Sensitivity You can set the sensitivity to suit the brightness of the surroundings. The sensitivity can be set to [AUTO] or within a sensitivity range equivalent to ISO 100 to 1600. The default setting is [AUTO]. Set [Sensitivity] in the Fn menu. (p.77) AUTO AUTO AUTO...
Page 86 Checking the Sensitivity in Capture Mode Press the 4 button in Capture mode. The set sensitivity is displayed on the LCD panel and in the viewfinder. You can display the number of recordable images by pressing the 4 button when the exposure mode is set to K (Sensitivity Priority). Expanding the Dynamic Range Dynamic range is the ratio that indicates the light level expressed by the CCD pixels from bright areas to dark areas.
Page 87: Changing The Exposure Mode
Noise Reduction When you use a digital camera to shoot with a long exposure or high sensitivity setting, image noise (image roughness or unevenness) becomes noticeable. You can reduce image noise by using Noise Reduction. Images shot with Noise Reduction take longer to save.
Page 88 Exposure Description Mode Lets you set aperture (Aperture for controlling the Priority) depth of field. Lets you set shutter speed and aperture to (Manual) capture the picture with creative intent. Lets you capture images that require p (Bulb) slow shutter speeds such as fireworks and night scenes.
Page 89 Turn the e-dial while pressing the mc button and adjust the exposure. The EV Compensation is displayed in the viewfinder and on the LCD panel. The shutter speed and aperture value are also displayed while adjusting the exposure. • Set EV Compensation in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps] in the [A Custom Setting] menu.
Page 90 e (Program) mode and e-dial You can set the action for the e-dial when turned in e (Program) mode. Set in [13. e-dial in Program] in the [A Custom Setting] menu. Program shift Using the K (Sensitivity Priority) Mode You can set the sensitivity to suit the brightness of the subject. The shutter speed and aperture are automatically set according to the selected sensitivity to obtain the appropriate exposure.
Page 91 Set the mode dial to K. Turn the e-dial and adjust the sensitivity. The shutter speed, aperture value and sensitivity are displayed in the viewfinder and on the LCD panel. • You can set the sensitivity to values equivalent to ISO 100 to 1600. [AUTO] is not available.
Page 92: Shutter Speed
Using the b (Shutter Priority) Mode Lets you set the desired shutter speed for expressing moving subjects. When taking pictures of a fast moving subject, you can increase the shutter speed to make the subject look still or decrease the shutter speed to have the subject show movement.
Page 93: Exposure Warning
• Turn the e-dial while pressing the mc button to change the EV compensation value. (p.100) • Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps] in the [A Custom Setting] menu. (p.101) •...
Page 94: Aperture Value
Using the c (Aperture Priority) Mode Set aperture for controlling the depth of field. The depth of field is deeper and the front and back of the focused object is clear when aperture is set to a large value. The depth of field is shallower and the front and back of the focused object is blurred when aperture is set to a small value.
Page 95 • Turn the e-dial while pressing the mc button to change the EV compensation value. (p.100) • Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps] in the [A Custom Setting] menu. (p.101) •...
Page 96 Using a (Manual) Mode You can set the shutter speed and aperture value. This mode is suitable to take pictures of your choice by combining them. This mode is convenient for taking pictures using the same combination of the shutter speed and aperture settings or taking intentionally underexposed (darker) or over-exposed (brighter) photographs.
Page 97 The shutter speed and aperture value are displayed in the viewfinder and on the LCD panel. Of the shutter speed and aperture value, the value being adjusted is underlined in the viewfinder. While adjusting the shutter speed or aperture value, the difference from the appropriate exposure (EV value) appears in the viewfinder.
Page 98 Combining with L Press the L button (p.101) to record the exposure value in a (Manual) mode. If the shutter speed or aperture is then changed, the combination of shutter speed and aperture changes while exposure is retained. Example: If the shutter speed is 1/125 sec and aperture is F5.6 and is recorded with the L button, and the shutter speed is changed to 1/30 sec with the e-dial, the aperture automatically changes to F11.
Page 99 Using the p (Bulb) Mode This mode is useful for the long exposures required for shooting night scenes and fireworks. The shutter remains open as long as the shutter release button is kept pressed. Set the mode dial to p. EV compensation, Continuous shooting and Exposure Bracket are not available in p (Bulb) mode.
Page 100: Selecting The Metering Method
Selecting the Metering Method Choose the part of the screen to use for measuring brightness and determining exposure. L (Multi-segment metering), M (Center-weighted metering) or N (Spot metering) mode can be selected. The default setting is L (Multi-segment metering). Multi-segment Center- weighted Spot Metering...
Page 101: Using The Spot Metering
Linking AF Point and AE During Multi-Segment Metering In [5. Link AF Point and AE] of the [A Custom Setting] menu (p.75), you can link the exposure and AF point in the focusing area during multi-segment metering. The default setting is [Off]. Exposure is set separately from AF point.
Page 102: Adjusting The Exposure
Adjusting the Exposure This allows you to deliberately overexpose (brighten) or under-expose (darken) your picture. Select 1/2 EV or 1/3 EV in [1. EV Steps] in the [A Custom Setting] menu. You can adjust the EV compensation from –2 to +2 (EV). Set the compensation by turning the e-dial while the mc button is pressed.
Page 103 Changing the Exposure Steps Set Exposure Steps in [1. EV Steps] in the [A Custom Setting] menu to increments of 1/2 EV or 1/3 EV. 1. EV Steps 1/2 EV Steps 1/3 EV Steps Exposure setting steps are set to 1/2 EV Recording the Exposure Before Shooting (AE Lock) AE Lock is a function that memorizes the exposure prior to taking the picture.
Page 104: Focusing
Focusing You can focus with the following methods. Autofocus Manual focus Using the Autofocus You can also choose the autofocus mode from l (Single mode) where the shutter release button is pressed halfway to focus on the subject and the focus is locked at that position, and k (Continuous mode) where the subject is kept in focus by continuous adjustment while the shutter release button is pressed halfway.
Page 105 Look through the viewfinder and press the shutter release button halfway. The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.) 1 Subjects that are Difficult to Focus on (p.60) Using the 4 Button to Focus on the Subject You can set the camera so that the focusing is not performed when the...
Page 106: Setting The Af Mode
• When [Sensitivity/No. of Shots] is selected, press the 4 button to display the currently selected sensitivity in the viewfinder. When [Sensitivity] is set to [AUTO] in the Fn menu, the automatically selected value is displayed. • When [Select AF point] is set to S (Select) and [Center of AF Point] is selected, the AF point can be set to the center by pressing the 4 button.
Page 107: Selecting The Focusing Area (Af Point)
• Setting cannot be changed in Picture mode and H mode (p.79). • k (Continuous mode) can be set when the mode dial is set to e, K, b, c, a or p. The autofocus mode is set to k in \ (Moving Object) of Picture mode or C (Kids) or E (Pet) of H mode.
Page 108 Set in [Select AF point] in the [A Rec. Mode] menu (p.74). Rec. Mode AF Mode AE Metering Select AF point File Format JPEG Rec. Pixels JPEG Quality Cancel MENU • AF point is not displayed in the viewfinder when [Off] is selected for [8. Superimpose AF Area] in the [A Custom Setting] menu (p.75).
Page 109: Fixing The Focus (Focus Lock)
Fixing the Focus (Focus Lock) If the subject is outside the range of the focusing area, the camera cannot automatically focus on the subject. In this situation, set [AF Mode] to l (Single mode). You can aim the focusing area toward the subject, use focus lock and recompose the picture.
Page 110 Re-compose the picture while keeping the shutter release button pressed halfway. • The focus is locked while the focus indicator ] is lit. • Turning the zoom ring in focus lock mode may cause the subject to be out of focus.
Page 111: Adjusting The Focus Manually (Manual Focus)
Adjusting the Focus Manually (Manual Focus) When you adjust the focus manually, you can either check with the focus indicator in the viewfinder or use the viewfinder matte field to adjust focus. Using the Focus Indicator The focus indicator ] appears in the viewfinder when the subject is in focus even during manual focus.
Page 112: Focusing Screen
• Focus manually using the matte field in the viewfinder when the subject is difficult to focus (p.60) and the focus indicator will not stay lit. • The beep that sounds when the image is focused can be turned off. (p.204) Using the Viewfinder Matte Field You can manually adjust the focus using the viewfinder matte field.
Page 113: Shooting In Catch-In Focus Mode
Shooting in Catch-in Focus Mode When [22. Catch-in focus] is set to On in the [A Custom Setting] menu (p.76), if the focus mode is set to l and one of the following types of lenses is attached, catch-in focus shooting is possible and the shutter is released automatically when the subject comes into focus.
Page 114: Checking The Composition, Exposure And Focus Before Shooting
Checking the Composition, Exposure and Focus Before Shooting You can use the preview function to check the depth of field, composition, exposure and focus before taking a picture. There are two preview methods. Digital Preview Optical Preview Selecting the Preview Method Choose whether to use Digital Preview or Optical Preview when the main switch is turned to the preview position (|).
Page 115: Displaying The Preview
Displaying the Preview Displaying the Digital Preview Focus on the subject, then compose the picture in the viewfinder and move the main switch to |. The icon (|) appears in the monitor during preview and you can check the composition, exposure and focus. Press the shutter release button halfway to end Digital Preview and start focusing.
Page 116 Turn the main switch to | while looking through the viewfinder. You can check the depth of field in the viewfinder while the main switch is on |. • No shooting information is displayed in the viewfinder, and the shutter cannot be released while the main switch is in the preview position (|).
Page 117: Continuous Shooting
Continuous Shooting Pictures can be taken continuously while the shutter release button is held down. Two types of Continuous shooting are available. With g (Continuous shooting (Hi)), pictures are taken continuously at the fastest frame rate until the camera buffer memory becomes full. With h (Continuous shooting (Lo)), pictures are taken continuously at the same interval.
Page 118 Use the four-way controller (45) to select g. Press the four-way controller (3) and use the four-way controller (45) to select g or h. Press the 4 button. The camera is ready to take pictures continuously. Press the shutter release button halfway. The autofocus system operates.
Page 119: Self-Timer Shooting
Self-Timer Shooting This camera has two types of self-timers: g and Z. Shutter will be released after about 12 seconds. Use this mode to include the photographer in the picture. A mirror pops up immediately after shutter release button is pressed. Shutter is released after about 2 seconds.
Page 120 Press the four-way controller (3) and use the four-way controller (45) to select g or Z. Press the 4 button. The camera is ready to take a picture. Confirm in the viewfinder that the subject you wish to shoot is properly framed and press the shutter release button halfway.
Page 121 • You can set the camera so that the beep does not sound. (p.204) • Exposure may be affected if light enters the viewfinder. Attach the provided ME viewfinder cap or use the AE lock function (p.101). (The light entering the viewfinder has no effect on the exposure when the exposure mode is set to a (Manual) (p.94).) Removing the Eyecup F...
Page 122: Remote Control Shooting (Remote Control F: Sold Separately)
Remote Control Shooting (Remote Control F: Sold Separately) The shutter can be released from a distance by using the optional remote control unit. You can select h (immediate shutter release) or i (3 sec. delayed release) for remote control shooting. The shutter will be released immediately after the shutter release button on the remote control unit is pressed.
Page 123 Press the four-way controller (3) and use the four-way controller (45) to select hor i. The self-timer lamp will blink to let you know that the camera is in remote control wait status. Press the 4 button. The camera is ready to take a picture. Press the shutter release button halfway.
Page 124 • The remote control does not work while the flash is being charged. • The remote control unit battery can send a remote control signal about 30,000 times. Contact PENTAX Service Center to replace the battery (this will involve a fee).
Page 125: Using Mirror Up Function To Prevent Camera Shake
Using Mirror Up Function to Prevent Camera Shake Use the Mirror Up function if camera shake is evident even when cable switch (optional) or remote control unit (optional) is used with a tripod. When shooting with the 2 sec. Self-Timer, the mirror pops up and the shutter is released 2 seconds after you press it, thereby avoiding the vibration of the mirror.
Page 126: Changing The Shooting Conditions Automatically When Shooting (Auto Bracket)
Changing the Shooting Conditions Automatically when Shooting (Auto Bracket) Shooting in Exposure Bracket Mode You can take continuous pictures with different exposure when the shutter release button is pressed. The first frame is exposed with no compensation, the second frame is underexposed (negative compensation) and the third is overexposed (positive compensation).
Page 127 Use the four-way controller (5) to select l (Auto Bracket). Turn the e-dial to set the EV compensation value. The following EV compensation values can be set according to the step interval set in [1. EV Steps] (p.101) in the [A Custom Setting] menu. Step interval 1/2 EV ±0.5, ±1.0, ±1.5, ±2.0...
Page 128 • When the AF mode is set to l (Single mode), the focus is locked in the first frame position and used for subsequent continuous frames. • When you release your finger from the shutter release button during Auto Bracket, the Auto Bracket exposure setting will remain effective for twice as much time as the exposure metering timer (default setting is 20 seconds) (p.99) and you can take a picture at the next compensation value.
Page 129: Using The Flash
Using the Flash This chapter provides details on the built-in flash of x and describes how to take pictures with the external flash. Compensating Flash Output ...128 Allowing Shooting while Charging the Flash ..129 Flash Characteristics in Each Exposure Mode ...130 Distance and Aperture when Using the Built-in Flash ...132...
Page 130: Compensating Flash Output
Compensating Flash Output You can change the flash output in a range of –2.0 to +1.0. The flash compensation values are as follows for 1/2 EV and 1/3 EV. Step interval –2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0 1/2 EV –2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0 1/3 EV * Set interval of steps in [1.
Page 131: Allowing Shooting While Charging The Flash
Allowing Shooting while Charging the Flash You can set to enable shooting while the flash is being charged. Set [On] for [15. Release when Charging] in the [A Custom Setting] menu (p.76). Pictures cannot be taken while the flash is charging by default. 15.
Page 132: Flash Characteristics In Each Exposure Mode
Flash Characteristics in Each Exposure Mode Using the Flash in b (Shutter Priority) Mode • When taking a moving subject, you can use the flash to change the blur effect. • Any desired shutter speed 1/180 sec. or slower can be set for taking a flash photograph.
Page 133 Using Slow-Speed-Sync You can use slow-speed-sync when shooting portraits with the sunset in the background. Both the portrait and the background are captured beautifully. • Slow-speed-sync slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake.
Page 134: Distance And Aperture When Using The Built-In Flash
Distance and Aperture when Using the Built-in Flash A set criteria is necessary between the guide number, aperture and distance when shooting with the flash to obtain the correct exposure. Calculate and adjust the shooting conditions if flash output is not sufficient. Built-in flash guide number ISO Sensitivity ISO 100...
Page 135: Da, D Fa, Fa J, Fa And F Lens Compatibility With The Built-In Flash
DA, D FA, FA J, FA and F Lens Compatibility with the Built-in Flash Depending on the lens used with the x, even if a lens without a hood is attached, the use of the built-in flash may not be possible or may be limited due to vignetting.
Page 136: Using An External Flash (Optional)
Using an External Flash (Optional) Using the optional external flash AF540FGZ, AF360FGZ or AF200FG enables a variety of flash modes, such as P-TTL auto flash mode, depending on the external flash being used. See the chart below for details. (Yes: Available #: Restricted No: Not available) Camera Function Red-eye reduction flash Automatic flash discharge...
Page 137 About the LCD Panel Display for AF360FGZ The AF360FGZ does not have the function to set the FORMAT size to [DIGITAL], but the difference in angle of view between standard 35 mm format and the x is automatically calculated based on the focal length of the lens used (when using DA, D FA, FA J, FA or F lenses).
Page 138: Using In Wireless Mode
• P-TTL auto is only available with the AF540FGZ, AF360FGZ or AF200FG flash unit. • The b will light in the viewfinder when the flash is ready (fully charged). • For details such as operation method and effective distance, please read the external flash manual.
Page 139 Setting the Channel for the External Flash First set the channel for the external flash unit. 1 Set the channel for the external flash unit. 2 Attach the external flash to the camera hot shoe. 3 Turn on the camera and the external flash, and press the shutter release button halfway.
Page 140 Changing the Built-in Flash Discharge Method You can change the built-in flash discharge method in wireless mode. Discharges the built-in flash. Discharges the built-in flash as a control flash. Set in [16. Flash in Wireless Mode] in the [A Custom Setting] menu (p.76). HSb (High-speed sync) is not available when the camera is set to discharge the built-in flash.
Page 141: Red-Eye Reduction
Wireless Flash Control (P-TTL Flash Mode) When using external flash units (AF540FGZ or AF360FGZ) for wireless shooting, the following information is exchanged between the flash units before the flash is discharged. Press the shutter release button fully. 1 The flash unit directly connected to the camera emits a control flash (relays the flash mode of the camera).
Page 142: Trailing Curtain Sync
Trailing Curtain Sync When using the built-in flash with an external flash (AF540FGZ or AF360FGZ) that is set to the Trailing curtain sync function, the built-in flash will also use this mode. Confirm that both flash units are fully charged before shooting.
Page 143 Discharging Multiple Flashes You can combine two or more external flashes (AF540FGZ, AF360FGZ or AF200FG) or you can use two or more external flashes in combination with the built-in flash. You can use the extension cord connection terminal on the flash to connect the AF540FGZ. You can connect AF360FGZ or AF200FG units as shown in the illustration below.
Page 144 Hot Shoe Grip as a malfunction may occur. • Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using PENTAX automatic flashes. 1 Connect the external flash to the camera indirectly. (p.140) 2 Set the sync mode for the external flash to the contrast-control-sync mode.
Page 145: Shooting Settings
Shooting Settings This chapter describes how to set the save format for pictures taken and other settings. Setting the Image Processing Method in Capture Mode (Custom Image) ...144 Setting the File Format ...146...
Page 146: Setting The Image Processing Method In Capture Mode (Custom Image)
Setting the Image Processing Method in Capture Mode (Custom Image) You can set Custom Image when the exposure mode is set to e (Program), K (Sensitivity Priority), b (Shutter Priority), c (Aperture Priority), a (Manual) or p (Bulb). By using Custom Image to change the [Image Tone], you can adjust settings such as the color and contrast before shooting an image.
Page 147 Press the 4 button. The Custom Image screen appears. After the power is turned on, the last image taken is displayed in the background. Set the main switch to | to change the background image to the Digital Preview image. Use the four-way controller (45) to choose the Image Tone.
Page 148: Setting The File Format
Setting the File Format Setting the JPEG Recorded Pixels You can select the number of recorded pixels from J, P and i. The more pixels there are, the larger the picture and the bigger the file size. The file size will also differ according to the [JPEG Quality] setting. The default setting is J 3872×2592.
Page 149: Setting The Jpeg Quality Level
Setting the JPEG Quality Level You can set the image quality level. The file size will also differ according to the [JPEG Rec. Pixels] setting. The default setting is C (Best). Best Images will be clearer but file size will be larger. Better Good Images will be grainier but file size will be smaller.
Page 150: Setting The File Format
Effects such as White Balance, Custom Image and Color Space are not applied to the image but such information is saved. Use RAW Display (p.185) or transfer to a PC, apply effects with the enclosed PENTAX PHOTO Laboratory 3 and create JPEG image.
Page 151: Setting The Raw Button Function
Setting the RAW Button Function You can set the function when the | button (p.19) is pressed in Capture mode. The following settings are available. Cancel each time O (On)/P (Off) File format selected when the | button is pressed in File Format Capture mode.
Page 152: Setting The White Balance
Press the four-way controller (5), and use the four-way controller (23) to select the file format when the | button is pressed. Press the 4 button. Press the 3 button twice. The camera returns to the Capture mode or Playback mode. Setting the White Balance White balance is a function for adjusting the color of an image so that white objects appear white.
Page 153 Press the { button in Capture mode. The Fn menu appears. Press the four-way controller (4). The [White Balance] screen appears. Press the four-way controller (23) and set. Set the main switch to | to display Digital Preview with the set White Balance.
Page 154: Color Temperature
Color Temperature The color of light shifts towards blue as the color temperature rises, and towards red as the color temperature falls. Color temperature describes this change in light color in terms of absolute temperature (K: Kelvin). This camera is capable of setting the white balance to enable taking pictures with natural coloring under a variety of lighting conditions.
Page 155 Use the four-way controller (3) to select K (Manual). Under the light to measure the white balance, fully display a white sheet of paper in the viewfinder or select a white area as the subject. Press the shutter release button fully.
Page 156 Press the 4 button. The camera is ready to take a picture with the set White Balance. • No image is recorded when the shutter release button is pressed to adjust the white balance. • [NG] appears when measuring is unsuccessful. Press the 4 button while displayed to return to the [Adjust White Balance] screen for remeasuring.
Page 157: Setting The Color Space
Press the 4 button. The camera returns to the [White Balance] screen. Press the 4 button. The camera is ready to take a picture with the set White Balance. • If [7. Adjust White Balance] in the [A Custom Setting] menu is set to [Off] after White Balance is adjusted, the adjusted values become invalid.
Page 158: Color Space
Color Space Color ranges for various input/output devices, such as digital cameras, monitors, and printers, differ. This color range is called the Color Space. To recreate different color spaces in different devices, standard color spaces have been proposed. This camera supports sRGB and AdobeRGB.
Page 159: Playback Functions
Playback Functions This chapter describes how to use the various playback functions in Playback mode. How to Operate the Menus During Playback ...158 Rotating Images ...160 Enlarging Playback Images ...161 Displaying Multiple Images ...163 Displaying a Folder ...165 Comparing Images ...166 Slideshow ...167 Changing Playback Display Method ...170 Deleting Multiple Images ...173...
Page 160: How To Operate The Menus During Playback
How to Operate the Menus During Playback Press the 3 button in Playback mode. The [Q Playback] menu appears. [Q Playback] Menu Setting Items Perform settings related to playing back images in the [Q Playback] menu. Item Playback display Instant Review Digital Preview Slideshow [A Custom Setting] Menu Setting Items...
Page 161: Playback Fn Menu Setting Items
Playback Fn Menu Setting Items Press the { button during playback. The Fn menu appears. Press the four-way controller (2345) or the 4 button to set the operation. Key or Item Button DPOF Settings RAW Display Digital Filter Slideshow Image Comparison •...
Page 162: Rotating Images
Rotating Images The x features a function that uses a sensor to rotate and correct the direction of the image when an image is captured. You can also rotate the captured image 90° counterclockwise at a time with the steps below. Press the Q button.
Page 163: Enlarging Playback Images
Enlarging Playback Images Images can be magnified up to 16 times in playback mode. Press the Q button and use the four-way controller (45) to select an image. 100-0046 100-0046 100-0046 1/2000 1/2000 1/2000 F5.6 F5.6 F5.6...
Page 164 Turn the e-dial to the right (toward y). Image enlarges at each calibration (1.2 times* to 16 times). Operations available during Enlarged view Four-way controller (2345) e-dial (toward right)/ mc button e-dial (toward left)/ L (Z) button 4 button M button { button *1 The default setting for the first click (minimum magnification) on the e-dial (toward right) is 1.2 times.
Page 165: Displaying Multiple Images
Displaying Multiple Images You can display 4, 9 or 16 images on the monitor at the same time. The default setting is 9-image display. The number of images can be changed but 9-image display is explained here. Press the Q button. Turn the e-dial to the left (toward The multi-image display screen appears.
Page 166 Turn the e-dial to the right (towards y) or press the 4 button. A full screen display of the selected image appears. Selecting the Number of Images to Display In the multi-image display screen, press the { button. The multi-image options screen appears. Use the four-way controller (425) to select the number of images to display at once.
Page 167: Displaying A Folder
Displaying a Folder You can display the contents of folders in the multi-image display screen. Turn the e-dial to the left (toward f) in the multi-image display screen. Use the four-way controller (2345) to select the folder you want to display and press the 4 button. The images in the folder are displayed according to the number selected in the multi-image options screen.
Page 168: Comparing Images
Comparing Images You can display two images side-by-side. Press the { button in Playback mode, and then press the 4 button. Two images are displayed side-by-side. The same image is displayed on the left and right. Turn the e-dial to select the images to compare.
Page 169: Slideshow
Slideshow You can play back all images recorded on your SD Memory Card successively. To start continuous playback, use the menu screen displayed on the monitor. Press the Q button and use the four-way controller (45) to select an image to be displayed first. Press the { button.
Page 170 Press the four-way controller (5). Start screen is displayed and slideshow begins. Operations available during a slideshow 4 button Four-way controller (4) Four-way controller (5) Four-way controller (3) Operations available when paused 4 button Four-way controller (4) Four-way controller (5) Four-way controller (3) Stop the slideshow.
Page 171: Setting The Slideshow Display Interval
Setting the Slideshow Display Interval Set image display interval for slideshow to [3 sec], [5 sec], [10 sec] or [30 sec]. The default setting is [3 sec]. Set whether or not to play back repeatedly. The default setting is [Off]. Select [Slideshow] in the [Q Playback] menu.
Page 172: Changing Playback Display Method
Changing Playback Display Method The camera switches display information when you press the M button in the Playback screen. Standard Histogram display Detailed information display No info. display • Refer to p.25 for various display information details. • The information that is shown first during playback is the same as that of the last playback in the previous session.
Page 173 Understanding Brightness If the brightness is correct, the graph peaks in the middle. If the image is too dark, the peak is on the left side, and if it is too bright, the peak is on the right side. Dark image Correct image Bright image When the image is too dark, the part to the left is cut off (dark portions with...
Page 174 Setting the Playback Display You can set whether or not to display the Bright/Dark area warning in Playback mode and set the initial magnification when enlarging images. Select [Playback display] in the [Q Playback] menu. Press the four-way controller (5). Use the four-way controller (45) to select O (On) or P (Off).
Page 175: Deleting Multiple Images
Deleting Multiple Images Deleting All Images You can delete all saved images at once. Deleted images cannot be restored. A confirmation screen appears when there are protected images. Press the Q button. The single-image playback screen appears. Press the i button twice. The Delete All screen appears.
Page 176: Deleting Selected Images (From Multi-Image Display)
Press the 4 button. All images are deleted. A confirmation screen appears when there are protected images. Press the four-way controller (23) to select [Delete All] or [Leave All] and press the 4 button. Deleting Selected Images (from Multi-image Display) You can delete multiple images from the multi-image display at once.
Page 177 The multi-image display screen appears. Press the i button. 9 appears on the images. Use the four-way controller (2345) to move to the images to delete and press the 4 button. Image is selected and O appears. Protected images cannot be selected. Press the i button.
Page 178: Deleting A Folder
Deleting a Folder You can delete all images in a selected folder. Turn the e-dial to the left (toward f) in Playback mode to display the folders. Press the four-way controller (2345) to select the folder to delete and press the i button. The Delete Folder confirmation screen appears.
Page 179: Protecting Images From Deletion (Protect)
Protecting Images from Deletion (Protect) You can protect images from being accidentally deleted. Even protected images are deleted if the inserted SD Memory Card is formatted. Press the Q button and use the four-way controller (45) to select an image to protect. Select an image in the single-image playback screen.
Page 180: Protecting All Images
Protecting All Images Press the Q button. The single-image playback screen appears. Press the Z button twice. The Protect all images screen appears. Press the four-way controller (23) to select [Protect] and press the 4 button. All images saved in the SD Memory Card are protected.
Page 181: Connecting The Camera To Av Equipment
Connecting the Camera to AV Equipment By using the provided video cable (I-VC28), you can play back images using a TV or other device with a video IN jack as your monitor. Make sure that both the TV and the camera are turned off before connecting the cable.
Page 182 Memo...
Page 183: Processing Images
Processing Images This chapter describes how to process pictures taken and edit RAW images. Processing Images with Digital Filters ...182 Editing RAW Images ...185...
Page 184: Processing Images With Digital Filters
Processing Images with Digital Filters You can edit shot images using digital filters. Processed images are saved under a different name. RAW images cannot be processed using the digital filter. Select an image in Playback mode. Press the { button. The Fn menu appears.
Page 185 Press the four-way controller (4). The screen for selecting the filter appears. Use the four-way controller (23) to select a filter. Select a filter and preview the effects on the screen. Adjust with e-dial and the four-way controller (45). Color Color Color MENU...
Page 186 Filter name Slim Brightness Press the 4 button. The save confirmation screen appears. Use the four-way controller (23) to select [Save as]. Press the 3 button to return to the previous screen. Select [Cancel] and press the 4 button to return to the single-image playback screen.
Page 187: Editing Raw Images
Editing RAW Images You can convert captured RAW files into JPEG files. Only RAW files captured with this camera can be edited. RAW files and JPEG files captured with other cameras cannot be edited on this camera. Editing a RAW Image In Playback mode, select an image to edit.
Page 188: Specifying The Parameters
Press the 4 button. The save confirmation screen appears. Use the four-way controller (23) to select [Save as]. Press the 3 button to return to the previous screen. Select [Cancel] and press the 4 button to return to the single-image playback screen. Press the 4 button.
Page 189 The following parameters can be changed. Recorded Pixels Quality Level White Balance Sensitivity Image Tone Saturation Contrast Sharpness Filter Effect Toning *1 This can be set when any mode other than [Monochrome] is selected. *2 This can be set when [Monochrome] is selected. Use the four-way controller (45) to change the parameter.
Page 190 Press the 4 button. The save confirmation screen appears. Use the four-way controller (23) to select [Save as] and press the 4 button. The RAW image is edited and saved as a new image.
Page 191: Printing From The Camera
Printing from the Camera This chapter describes how to make the printing settings. Setting the Printing Service (DPOF) ...190 Printing Using PictBridge ...193...
Page 192: Setting The Printing Service (Dpof)
Setting the Printing Service (DPOF) You can order conventional photograph prints by taking the SD Memory Card with recorded images to a store for printing. DPOF (Digital Print Order Format) settings allow you to specify the number of copies and to imprint the date. •...
Page 193: Settings For All Images
Use the four-way controller (45) to choose the number of copies and press the four-way controller (3). The frame moves to [Date]. Use the four-way controller (45) to choose whether to insert the date (O) or not (P). O : The date will be printed. P : The date will not be printed.
Page 194 Press the four-way controller (2). The DPOF screen appears. Press the { button. The screen for making DPOF settings for all images appears. Use the four-way controller (45) to choose the number of copies and whether to insert the date (O) or not (P). Refer to Steps 4 and 5 of “Printing Single Images”...
Page 195: Printing Using Pictbridge
PC. • RAW images cannot be printed directly from the camera. Use [RAW display] (p.185) to convert to a JPEG image or transfer to a PC and use PENTAX PHOTO Browser 3 to print RAW images.
Page 196: Setting Transfer Mode
Setting Transfer Mode Press the 3 button. The [A Rec. Mode] menu or [Q Playback] menu appears. Use the four-way controller (45) to select the [R Set-up] menu. Use the four-way controller (23) to select [USB Connection]. Press the four-way controller (5). A pop-up menu appears.
Page 197: Connecting The Camera To The Printer
Connecting the Camera to the Printer Turn off the camera. Face the arrow on the provided USB cable toward the mark on the camera, and connect the camera and PictBridge compatible printer. The PictBridge logo is displayed on PictBridge compatible printers. Turn the printer on.
Page 198: Printing Single Images
Printing Single Images Use the four-way controller (23) to select [Single Image] on the PictBridge menu. Press the 4 button. The Print single image screen appears. Use the four-way controller (45) to choose an image to print. Use the four-way controller (23) to choose the number of copies. You can print up to 99 copies.
Page 199 Press the { button. The screen for changing print settings appears. Select [Paper Size] and press the four-way controller (5). The [Paper Size] screen appears. Use the four-way controller (2345) to choose the paper size. You can only choose a size that is supported by your printer.
Page 200: Printing All Images
Printing All Images Use the four-way controller (23) to select [All Images] on the PictBridge menu. Press the 4 button. The Print all images screen appears. Choose the number of copies and whether to imprint the date or not. The number of copies and the date setting that you choose apply to all of the images.
Page 201: Printing Images Using The Dpof Settings
Printing Images Using the DPOF Settings Use the four-way controller (23) to select [DPOF AUTOPRINT] on the PictBridge menu. Press the 4 button. The Print w/DPOF settings screen appears. Use the four-way controller (45) to check the number of copies for each image, whether the date is imprinted or not, and total number of copies.
Page 202 Memo...
Page 203: Camera Settings
Camera Settings This chapter describes how to change the camera settings. How to Operate the [R Set-up] Menu ...202 Formatting the SD Memory Card ...203 Setting the Beep Setting, Date and Time, and Display Language ...204 Adjusting the Monitor and the Menu Display ...210 Setting the Image Folder Naming Convention ...213...
Page 204: How To Operate The [R Set-Up] Menu
Dust Alert Dust Removal Sensor Cleaning Reset * Refer to p.11 of the “PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 Operating Manual” for details on connecting the camera to a PC. Function Formats the SD Memory Card. Switches the beep tone on/off.
Page 205: Formatting The Sd Memory Card
Formatting the SD Memory Card Use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices. Formatting will delete all the data on the SD Memory Card. • Do not open the card cover while formatting SD Memory Card. The card may be damaged beyond use.
Page 206: Setting The Beep Setting, Date And Time, And Display Language
Setting the Beep Setting, Date and Time, and Display Language Turning the Beep On and Off You can turn the camera operation beep on or off. The default setting is all O (On). There are five items that you can set: In-focus, AE Lock, | button, Self- timer and Remote Control.
Page 207: Changing The Date And Time And The Display Style
Changing the Date and Time and the Display Style You can change the initial date and time settings. You can also set the display style. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd]. Choose [12h] (12 hour) or [24h] (24 hour) for time display method. Set in [Date Adjust] in the [R Set-up] menu (p.202).
Page 208: Setting The World Time
Setting the World Time The date and time selected in “Initial Settings” (p.49) serve as the date and time of your present location. Setting [World Time] enables you to display the local date and time on the monitor when traveling overseas. Select [World Time] in the [R Set-up] menu.
Page 209 Use the four-way controller (3) to select [DST]. Use the four-way controller (45) to select O (On) or P (Off). Select O (On) if the Destination city uses daylight saving time (DST). Press the 4 button. The World Time setting is saved. Press the 3 button twice.
Page 210: List Of World Time Cities
List of World Time Cities Region Honolulu North America Anchorage Vancouver San Francisco Los Angeles Calgary Denver Chicago Miami Toronto New York Halifax Mexico City Central and South Lima America Santiago Caracas Buenos Aires Sao Paulo Rio de Janeiro Lisbon Europe Madrid London...
Page 211: Setting The Display Language
Region City Perth Oceania Adelaide Sydney Noumea Wellington Auckland Pago Pago Setting the Display Language You can change the language in which the menus, error messages, etc. are displayed. Set in [Language/ ] in the [R Set-up] menu (p.202). You can choose from 18 languages: English, French, German, Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Russian, Korean, Chinese (Traditional/Simplified) and Japanese.
Page 212: Adjusting The Monitor And The Menu Display
Adjusting the Monitor and the Menu Display Setting the Text Size You can set the size of the text selected in the menus to [Std.] (normal display) or [Large] (magnified display). Set in [Text Size] in the [R Set-up] menu (p.202). Set-up Format Beep...
Page 213: Adjusting The Brightness Of The Monitor
Adjusting the Brightness of the Monitor You can adjust the brightness of the monitor. Adjust settings when the monitor is hard to see. Set in [Brightness Level] in the [R Set-up] menu (p.202). Set-up Guide display 3sec Brightness Level Cancel MENU Setting the Display for Instant Review and Digital Preview...
Page 214 Press the four-way controller (5) and use the four-way controller (23) to select from [1 sec], [3 sec], [5 sec] or [Off], and then press the 4 button. Use the four-way controller (3) to select [Histogram]. Use the four-way controller (45) to select O (On) or P (Off) for [Histogram].
Page 215: Setting The Image Folder Naming Convention
Setting the Image Folder Naming Convention Selecting the Folder Name You can select the method for assigning the folder names for storing images. The default setting is [Date]. The two digits of the [month] and [day] on which the picture was taken are assigned as the folder name in the form of [xxx_MMDD].
Page 216: Selecting The Video Output Format And Power Settings
Selecting the Video Output Format and Power Settings Selecting the Video Output Format When you connect the camera to AV equipment such as a TV, choose the appropriate video output format (NTSC or PAL) for playing back images. Set in [Video Out] in the [R Set-up] menu (p.202). 1 Connecting the Camera to AV Equipment (p.179) Set-up Guide display...
Page 217: Selecting A Battery
Selecting a Battery You can set the battery priority to the camera or the battery grip when the optional Battery Grip D-BG3 (p.235) is attached. The default setting is [Auto Select]. Select [Select battery] in the [R Set-up] menu. Press the four-way controller (5).
Page 218: Using Pixel Mapping
Using Pixel Mapping Pixel mapping is a function for mapping out and correcting for defective pixels in the CCD. Select [Pixel Mapping] in the [R Set-up] menu. Press the four-way controller (5). Press the four-way controller (23) to select [Pixel Mapping] and press the 4 button.
Page 219: Selecting Capture Mode Settings To Save In The Camera
Selecting Capture Mode Settings to Save in the Camera You can select which settings to save when the camera is turned off. The following settings can be saved: Flash mode, Drive mode, White Balance, Sensitivity, EV Compensation, Flash Exp. Comp., Playback Display, Scene Display and File No.
Page 220 Memo...
Page 221: Resetting To Default Settings
Resetting to Default Settings Resets the camera settings. Resetting Rec. Mode/Playback/ Set-up Menu ..220 Resetting the Custom Function Menu ...221...
Page 222: Resetting Rec. Mode/Playback/Set-Up Menu
Resetting Rec. Mode/Playback/ Set-up Menu Settings in [A Rec. Mode] menu, [Q Playback] menu and [R Set-up] menu can be reset to default settings. However, Date Adjust, Language/ World Time city settings are not reset. Select [Reset] in the [R Set-up] menu. Press the four-way controller (5).
Page 223: Resetting The Custom Function Menu
Resetting the Custom Function Menu Reset settings in [A Custom Setting] menu to default settings. Select [Reset Custom Function] in the [A Custom Setting] menu. Press the four-way controller (5). The [A Reset Custom Function] screen appears. Use the four-way controller (23) to select [Reset].
Page 224 Memo...
Page 225: Appendix
Appendix Default Settings ...224 Functions Available with Various Lens Combinations ...228 Notes on [23. Using Aperture Ring] ...230 Cleaning the CCD ...231 Optional Accessories ...235 Error Messages ...240 Troubleshooting ...243 Main Specifications ...246 Glossary ...250 Index ...255 WARRANTY POLICY ...260...
Page 226: Default Settings
Default Settings The table below lists the factory default settings. The current setting (last memory) is saved when the camera is turned off. Reset Setting Yes : The setting returns to the default setting with the reset function (p.219). No : The setting is saved even after reset. [A Rec.
Page 227 Item Histogram Digital Preview Bright/Dark area Interval Slideshow Repeat Playback [R Set-up] Menu Item Format Beep Date Adjust World Time setting Hometown (City) World Time Hometown (DST) Destination (City) Destination (DST) Language/ Text Size Guide display Brightness Level Video Out USB Connection Auto Power Off Folder Name...
Page 228 Item Sensor Cleaning Reset [A Custom Setting] Menu Item Settings 1. EV Steps 2. Sensitivity Steps 3. Meter Operating Time 4. L with AF locked 5. Link AF Point and AE 6. Auto Bracketing order 7. Adjust White Balance 8. Superimpose AF Area 9.
Page 229 Fn Menu Item Drive Mode Flash Mode White Balance ISO Sensitivity H (Scene) mode Custom Image DPOF Settings Digital Filter* Slideshow RAW Display Image Comparison * The filter color and frequency settings can be saved or reset. Reset Default Setting Setting 9 (Single frame shooting)
Page 230: Functions Available With Various Lens Combinations
Functions Available with Various Lens Combinations Lenses that can be used with this camera Only DA and FA J lenses and D FA/FA/F/A lenses having an s (Auto) position on the aperture ring can be used with factory default settings. Refer to Notes on [23.
Page 231 Lens names and mount names DA lenses with an ultrasonic motor and FA zoom lenses with power zoom use the K mount. FA prime lenses (non-zoom lenses), DA lenses without ultrasonic motors and D FA, FA J and F lenses use the K mount.
Page 232: Notes On [23. Using Aperture Ring]
Notes on [23. Using Aperture Ring] Aperture Ring Use When [23. Using aperture ring] is set to [Permitted] in [A Custom Setting] menu (p.76), the shutter can be released even if the aperture ring of the D FA, FA, F or A lens is not set to the s (Auto) position or a lens without an s position is attached.
Page 233: Cleaning The Ccd
Cleaning the CCD Shadows may appear in the image for white backgrounds and other shooting conditions if the CCD becomes dirty or dusty. This indicates that the CCD must be cleaned. Removing Dust by Shaking the CCD The Dust Removal function shakes the CCD to remove dust that has collected.
Page 234 Select [Dust Alert] in the [R Set- up] menu. Press the four-way controller (5). The [Dust Alert] screen appears. Fully display a white wall or uniformly bright subject in the viewfinder and press the shutter release button fully. After image processing is performed, the Dust Alert screen appears.
Page 235: Removing Dust With A Blower
Removing Dust with a Blower Raise the mirror up and open the shutter to clean with a blower. Please contact PENTAX Service Center for professional cleaning because the CCD is a precision part. Cleaning services involve a fee. You can use the Imagesensor Cleaning Kit O-ICK1 (optional) when cleaning the CCD.
Page 236: Turn Off The Camera
Press the four-way controller (5). The [Sensor Cleaning] screen appears. Use the four-way controller (23) to select [Mirror Up]. Press the 4 button. The mirror is locked in the up position. If you used Dust Alert to detect dust on the sensor within the last 30 minutes, the Dust Alert image appears on the monitor.
Page 237: Optional Accessories
Optional Accessories A number of dedicated accessories are available for this camera. Please contact a PENTAX Service Center for details regarding accessories. Products marked with an asterisk (*) are the same as those supplied with the camera. Battery Grip D-BG3 The Battery Grip has features such as a shutter release button and L button to accommodate shooting vertically.
Page 238: Flash Accessories
Flash Accessories Auto Flash AF540FGZ Auto Flash AF360FGZ The AF540FGZ and AF360FGZ are P- TTL auto flash units with a maximum guide number of 54 and 36 (ISO 100/m), respectively. Their features include slave-sync flash, contrast-control-sync flash, auto flash, high-speed sync flash, wireless flash, slow-speed sync and trailing curtain sync flash.
Page 239: For Viewfinder
Off-camera Shoe Clip CL-10 When using the AF540FGZ or AF360FGZ as a wireless flash, this large clip is used for setting the external flash on a desk or table. For Viewfinder Magnifier Eyecup O-ME53 This viewfinder accessory is for magnifying up to 1.18 times. When the eyecup is attached to the x with a viewfinder magnification of approximately 0.85...
Page 240: Remote Control F
Diopter correction lens adapter M This accessory adjusts the diopter. Install it on the viewfinder. If it is difficult to see the viewfinder image clearly, choose one of the eight correction lens adapter M of approximately –5 to +3 m ME Viewfinder Cap (*) Eyecup F Cable Switch CS-205...
Page 241 Imagesensor Cleaning Kit O-ICK1 Clean the optical parts such as the CCD and lens of this camera. Others Body Mount Cap K Hot Shoe Cover F USB Cable I-USB17 (*) Video Cable I-VC28 (*)
Page 242: Error Messages
Error Messages Error Message Description The SD Memory Card is full and no more images can be saved. Insert a new SD Memory Card or delete unwanted images. (p.41, p.72) Memory card full You may be able to save new images by converting to JPEG format or changing the JPEG record pixels or JPEG quality setting.
Page 243 Error Message Not enough battery remaining to activate Pixel Mapping Image folder cannot be created The image is not stored Settings not stored Rotation information cannot be saved to this image No more images can be selected This RAW file cannot be developed This image cannot be filtered...
Page 244 Error Message Description Printer is running out of ink. This appears when Low ink level this signal is received from the printer. After two in the printer seconds, the printer resumes printing. No ink in the printer Printer has run out of ink. Replace ink and print. Paper is jammed in the printer.
Page 245: Troubleshooting
Troubleshooting We recommend checking the following items before contacting a service center. Problem Cause Batteries are not installed The camera Batteries are not does not turn installed properly The battery power is low The lens aperture ring setting is other than the s position The flash is The shutter...
Page 246 D (Candlelight) or E (Museum). (p.79) Use manual zoom. (p.61) Set [USB Connection] in the [R Set-up] menu to [PC]. Refer to p.11 of the “PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 Operating Manual” for details on connecting the camera to a PC.
Page 247 Problem Cause The Shake Reduction function is off The Shake Reduction function is not set properly Shake Shutter speed is Reduction too low for the does not work Shake Reduction function to be effective when panning or shooting night scenes, etc. The subject is too close In rare cases, the camera may not operate correctly due to static electricity.
Page 248: Main Specifications
Main Specifications Type Effective Pixels Sensor Recorded Pixels Sensitivity (Standard output sensitivity) File Format JPEG Quality Storage Medium Number of Shots Recorded File Format/ Pixels JPEG Quality | (PEF) Approx. 235 Approx. 119 3872×2592 | (DNG) Approx. 235 Approx. 119 3872×2592 3008×2000 1824×1216...
Page 249 (1) Auto 1/4000 to 30 sec. (stepless), (2) Manual 1/4000 Shutter to 30 sec. (1/2 EV step or 1/3 EV step), Bulb, Electromagnetic release, Shutter lock by setting Main switch in OFF position PENTAX K Lens Mount contacts, K-mount with power contacts) PENTAX K...
Page 250 Daylight-sync flash, Slow-speed-sync flash, ISO range = P-TTL: 100 to 1600, Auto-popup function Hot shoe with M-contact, which couples with PENTAX dedicated auto flashes, ISO range = P-TTL: 100 to 1600, Automatic flash, Red-eye reduction flash function, High-speed-...
Page 251 ROM) S-SW74 (PENTAX PHOTO Browser 3/PENTAX PHOTO Accessories Laboratory 3), Strap O-ST53, AA lithium batteries (four), Operating Manual (this book), Quick Guide, PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 Operating Manual English, French, German, Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,...
Page 252: Glossary
Glossary AdobeRGB Color space recommended by Adobe Systems, Inc. for commercial printing. Wider range of color reproduction than sRGB. Covers most of the color range so colors only available when printed are not lost when editing images on a computer. When image is opened by non-compatible software, the colors look lighter.
Page 253 Dark Portion Underexposed area in the image loses contrast and appears black. DCF (Design Rule for Camera File System) A digital camera file system standard established by the Japan Electronics and Information Technology Industries Association (JEITA). Depth of field Area of focus. This depends on the aperture, lens focal length, and distance to the subject.
Page 254 Process of adjusting the image brightness by changing the shutter speed and/or aperture value. Exif (Exchangeable image file format for digital still camera) A standard digital camera file format established by the Japan Electronics and Information Technology Industries Association (JEITA). Focus point Position in the viewfinder that determines focus.
Page 255 ND (Neutral Density) Filter A filter available in different saturation levels that adjusts the brightness without affecting the color tone of pictures. Noise Reduction Process to reduce noise (image roughness or unevenness) caused by slow shutter speed or high sensitivity shooting. NTSC/PAL These are video output formats.
Page 256 Vignetting The picture edges are blackened when part of the light coming from the subject is blocked by the hood or filter ring, or when the flash is partially blocked by the lens. White Balance While shooting, color temperature is adjusted to match the light source so that the subject appears to have correct color.
Page 257: Index
Index Symbols [A Custom Setting] Menu ...75, 158, 226 i (Delete) button ...21, 72 mc (EV Compensation) button ...19, 21, 100 K (Flash pop-up) button ...19, 62 Q (Playback) button ...19, 21, 70 [Q Playback] Menu ...158, 224 | Preview ...113 Z (Protect) button ...21, 177 [A Rec.
Page 258 Card access lamp ...17 CCD cleaning ...231 Center-weighted ...99 Cloudy (White Balance) ...150 Color (Digital Filter) ...183 Color Space ...155 Color Temperature ...152 Continuous Autofocus ...108 Continuous mode k ...102, 104 Continuous Shooting ...115 Contrast ...144 Contrast-Control-Sync (Flash) ...142 Correct exposure ...81 Custom Image ...144 Custom Setting ...75, 158 [A Custom Setting]...
Page 259 Focus point ...105 Focusing ...102 Folder Name ...213 Food K ...79 Format ...203 Four-way controller (2345) ...19, 21 Green button ...18 Green button in Manual ...96 Guide display ...22, 210 HDR (Digital Filter) ...184 High-ISO Noise Reduction ...85 High-Speed Flash Sync Mode ...136 Histogram ...26, 170 Hue ...144...
Page 260 4 button ...19, 21 4 button when shooting ...103 Optical Preview ...113 Optional Accessories ...235 e (Program) Mode ...86 PAL ...214 Pet E ...79 PictBridge ...193 Pixel Mapping ...216 Pixels ...146 Playback ...25, 70 Q (Playback) button ...19, 21, 70 Playback display ...172 [Q Playback] Menu ...158, 224 Playback Time ...39...
Page 261 Spot Metering ...99 sRGB ...155 Strap ...36 Sunset K ...79 Superimpose AF Area ...28, 105 Surf & Snow i ...79 K (Sensitivity Priority) Mode ...88 Text Size ...210 Toning ...144 Trailing curtain sync ...140 Tungsten Light (White Balance) ...150 TV ...179 b (Shutter Priority) mode ...90 USB cable ...195 USB Connection ...194...
Page 262: Warranty Policy
Shipping charges are to be borne by the owner. If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that...
Page 263 Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
Page 264 For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 265: Declaration Of Conformity
Product Name: Model Number: x Contact person: Customer Service Manager Date and Place: February, 2008, Colorado PENTAX Imaging Company A Division of PENTAX of America, Inc. 600 12 Street, Suite 300 Golden, Colorado 80401 U.S.A. Phone: 303-799-8000 FAX: 303-790-1131 PENTAX Digital Still Camera...
Page 266 Information on disposal for users 1. In the European Union If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. There exists a separate collection system for these products. Used electric/electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Page 267 Memo...
Page 268 (European Headquarters) PENTAX U.K. Limited PENTAX France S.A.S. PENTAX Italia S.r.l. PENTAX (Schweiz) AG PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN PENTAX Imaging Company A Division of PENTAX of America, Inc. PENTAX Canada Inc. PENTAX Trading (SHANGHAI) Limited •...

This manual is also suitable for:

19541 19554

Pentax K200D Operating Manual

Before Using Your Camera

Getting Started

Basic Operations

Shooting Functions

Using the Flash

Shooting Settings

Playback Functions

Processing Images

Printing from the Camera

Camera Settings

Resetting to Default Settings

Appendix

Quick Links

Related Manuals for Pentax K200D

Summary of Contents for Pentax K200D