Pentax KC-01 Operating Manual page 250

248
Problem
Autofocus does
not work
The AE Lock
function does
not operate
The built-in
flash does not
discharge
The power
zoom system
does not work
The USB
connection with
10
a computer
does not work
properly
Cause
The subject is not in
the AF area
The subject is too
close
The focus mode is
set to \
p mode is set
When the flash
mode is set to C or
C , the flash will
not discharge if the
subject is bright
a mode is set
K, d, A, Z,
y, U, n, or E of
H mode is set
The camera does
not have a power
zoom function
The USB
connection mode is
set to [PTP]
Remedy
Position the subject in the AF area on the
monitor. If the subject is outside the AF
area, aim the camera at the subject and
lock the focus, then compose a picture
and press the shutter release button fully.
(p.97)
Move away from the subject and take a
picture.
Set the focus mode switch to =. (p.92)
AE Lock is not available in p mode.
Set the flash mode to E (Manual Flash
Discharge) or F (Manual Flash+Red-
eye Reduction). (p.59)
Set the mode dial to any mode other than
a (Flash Off).
Set H mode to any mode other than K
(Sunset), d (Blue Sky), A (Night
Scene), Z (Night Scene HDR), y
(Backlight Silhouette), U (Candlelight),
n (Stage Lighting) or E (Museum).
(p.77)
Use manual zoom.
Set [USB Connection] to [MSC] in
[Interface Options] of the [R Set-up 2]
menu. (p.209)