Pentax KC-01 Operating Manual page 105

6
Press the shutter release button
fully.
For g, the self-timer lamp starts blinking
slowly and then blinks rapidly 2 seconds
before the shutter is released. A beep is
heard and the rate increases. The shutter
will be released about 12 seconds after
the shutter release button is pressed fully.
For Z, the shutter will be released about 2 seconds after the shutter
release button is pressed fully.
• Select 9 (Single Frame Shooting) in the Drive Mode setting screen to cancel
shooting with the self-timer. The setting is canceled automatically when the
camera is turned off if [Drive Mode] is set to P (Off) in [Memory] of the [A
Rec. Mode 3] menu. (p.195)
• The Shake Reduction function is fixed to R (Off).
• You can set the camera so that the beep does not sound. (p.186)
103
4