Pentax KC-01 Operating Manual page 27

Playback Mode
The captured image and shooting information are displayed in the single
image display of playback mode.
1 Playing Back Images (p.64)
Press the M button to select the type of information displayed in the
single image display. Use the four-way controller (2345) to select a
display type and press the 4 button to set the playback information
display screen.
1/ 1/ 2000 2000 F2.8 F2.8
Single image display
(Standard Information Display)
Screen Display
Standard Information
Display
Detailed Information
Display
Histogram Display
RGB Histogram
Display
No Information Display Only the captured image is displayed.
The information selected here is displayed the next time the camera is
switched to playback mode.
If [Playback Info Display] is set to P (Off) in [Memory] of the [A Rec. Mode 3]
menu, the Standard Information Display always appears first when the camera
is turned on. (p.195)
100-0001 100-0001
M
200 200
Displayed Information
The captured image, file format and operation guide
indicators are displayed.
Detailed information on how and when the image was
taken is displayed in two pages. (p.26)
The captured image and brightness histogram are
displayed. Not available during movie playback. (p.28)
The captured image and RGB histogram are displayed.
Not available during movie playback. (p.28)
Standard Information Display Standard Information Display
Cancel Cancel
MENU
Playback information display
selection
25
1
OK OK
OK