Troubleshooting - Pentax KC-01 Operating Manual

Troubleshooting

In rare cases, the camera may not operate correctly due to static
electricity. This can be remedied by taking the battery out and putting it
back in again. After these procedures are done, if the camera operates
correctly, it does not require any repairs.
We recommend checking the following items before contacting a service
center.
Problem
Battery is not
installed
The camera
does not turn
The battery power
on
is low
The built-in flash is
charging
There is no
available space on
the SD Memory
The shutter
Card
cannot be
released
Recording
The lens aperture
ring is set to a
position other than
s
Autofocus does The subject is
not work difficult to focus on
Cause
Check if a battery is installed. If not, install
a fully charged battery.
Install a fully charged battery, or use the
AC Adapter kit K-AC1202 (optional).
(p.42)
E blinks red while the built-in flash is
charging. Wait until charging is finished.
Insert an SD Memory Card with available
space or delete unwanted images. (p.45,
p.163)
Wait until recording is finished.
Set the lens aperture ring to the s
position or select [Enable] in [16. Using
Aperture Ring] of the [A Custom
Setting 3] menu. (p.235)
Autofocus cannot work well for subjects
that have low contrast (the sky, white
walls, etc.), dark colors, intricate designs,
rapidly-moving objects or scenery shot
through a window or a net-like pattern.
Lock focus on another object located at
the same distance as your subject, then
aim at the target and press the shutter
release button fully. Alternatively, use
manual focus. (p.98)
Remedy
247
10