Setting The Monitor And The Menu Display - Pentax KC-01 Operating Manual

190
Setting the Display Language
You can change the language in which the menus, error messages, etc.
are displayed.
Set in [Language/u] of the [R Set-up 1] menu.
1Setting the Display Language (p.50)

Setting the Monitor and the Menu Display

Setting the Standby Mode Display Method
Sets the monitor display when the standby mode display is set to
[Standard Information Display] or [No Information Display].
1
Select [Live View] in the [A Rec. Mode 3] menu, and press
the four-way controller (5).
The [Live View] screen appears.
2
Press the four-way controller
7
(5), use the four-way controller
(23) to select a grid display
type, and press the 4 button.
Select from e (4x4 Grid), f (Golden
Section), g (Scale) or h (default setting).
3
Press the four-way controller (23) to select [Histogram
Display] or [Bright/Dark Area], and use the four-way
controller (45) to select O (On) or P (Off).
Histogram Display Shows the brightness distribution of an image. (p.28)
Bright/Dark Area
4
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
Bright (overexposed) portions blink red and dark
(underexposed) portions blink yellow. (p.29)
Live View Live View
Show Grid Show Grid
Histogram Display Histogram Display
Bright/Dark Area Bright/Dark Area
Cancel Cancel
MENU MENU
OK OK
OK