Speakers (Front); Power Button Board - HP Spectre x360 Maintenance And Service Manual

Speakers (front)

Description
Speaker kit (front speakers)
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the front speakers:
1. Remove the cables securing each front speaker to the computer (1).
2. Remove the four Phillips M1.6×2.0–I screws securing each of the two front speakers to the computer (2).
3. Remove the two Phillips M1.6×3.2-I screws securing each of the two front speakers to the computer (3).
4. Remove the front speakers (4).
Reverse this procedure to install the front speakers.

Power button board

Description
Power button board
Bottom cover on page
Battery on page 35).
34).
L37668-001
Spare part number
L37653-001
Speakers (front) 39