Table of Contents
Advertisement
Solid-state drive (SSD)
Description
1 TB, PCIe, Gen3×4, NVMe, TLC
512 GB, PCIe, Gen3×4, SS, NVMe, TLC
512 GB, PCIe, Gen3×4, Self-encrypting drive (SED), Opal 2, TLC
512 GB, SATA-3, FIPS-140-2, TLC
360 GB, PCIe Gen3×4, NVMe,TLC
256 GB, PCIe, Gen3x4, SS, NVMe, TLC
256 GB, PCIe, NVMe, value
256 GB, SATA-3, FIPS-140-2, TLC
256 GB, SATA-3, Opal 2, TLC
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1.
Remove the Phillips M2.0×2.0 screw (1) that secures the drive to the system board.
42
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Bottom cover on page
38).
Spare part number
L13728-001
L13727-001
L13726-001
L13725-001
L13724-001
L13721-001
L13722-001
L50400-001
L13723-001
L13720-001
Battery on page
40).
Advertisement
Table of Contents
