Setting The Options; Deleting A Location - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 111 Wednesday, December 19, 2007 11:28 AM
Menu Option
Set Range
Set Speed Limit
Set Lockout
Delete Location

Setting the Options

[MENU]
Program Location
Select a location type (POI, Dangerous Xing, or Dangerous Road).
New Location
The scanner assigns a sequentially created number to the location.
Edit Name
Use the Scroll Control and
example, enter the name of the place or the Route Number.
F
Set Type
location type you first selected and set the location to either one of the other types
or change the data in an existing location.
This option also lets you associate a new Alert Tone to POI. Dangerous Xing and
Dangerous Road each have unique Alert Tones that cannot be changed. You can
still set a different volume level with the new Alert Tone for all three types.
Set LocationInfo
Set Lockout
1.0km, 0.5km, and 0.1km or (1.0mile, 0.50mile and 0.10mile). If you hear the first
and prefer to not hear any others that occasion, simply press [L/O] to disable the
operation while keeping all the data for another time. You can use the menu
Lockout option as well. When you set the location system to Temporary L/O
and move away more than four miles and then come back again, L/O status is
automatically canceled. If you turn off the switch, the scanner is unlocked.

Deleting a Location

If you have programmed a location that you no longer want, you can delete it as
follows.
Dangerous
POI
Xing
•
•
• •
• •
F
F
F
F
to give the New Location a name. You could, for
At this level you have an opportunity to reassign or edit the
F
Input the latitude and then longitude.
F
As you near your target location, an alert sounds at
Dangerous
Road
•
•
•
Using the UBC800XLT with a GPS
F
111