Uniden UBC800XLT Owner's Manual page 67

UB356ZH.fm Page 67 Wednesday, December 19, 2007 11:28 AM
This setting control whether the system is automatically enabled and disabled
when you connect a GPS to the scanner.
Set Latitude — Enter the system's latitude using the format you selected in the
system settings.
Set Longitude — Enter the system's longitude using the format you selected in the
system settings.
Set Range — Set the system's range using the units you selected in the system
settings.
Set GPS Enable — L/O status is automatically controlled by receiving data from
GPS.
Setting the Fleet Map
[MENU]
Program System
Select a Motorola Type I system
Edit Sys Option
Edit Fleet Map
Preset — select from the16 most common fleet maps
Custom — allows you to enter a custom fleet map. Enter the size code (0 to 14)
for each block. Press
For Motorola Type I and Type IIi Hybrid systems, you must enter a system fleet
map in order for the scanner to properly track and display talk group ID's. The fleet
map is usually included in the same resource that provided system frequencies
and talk group ID lists.
Note: If you don't know the fleet map for your Motorola Type I system, check the
Internet such as www.radioreference.com or the other websites we reference.
Setting the Status Bit
[MENU]
Program System
Select a Motorola Type I or II system
Edit Sys Option
Set Status Bit
Ignore — the scanner rounds all received ID's down to the next interval of 16.
The default setting is Ignore.
Yes — the scanner treats all received ID's as unique ID's.
F
F
F
F
F
to select.
F
F
F
M (Type I Only)
F
Programming Your Scanner
M
67