Selecting Systems To Scan; Selecting System Channel Groups; Locking/Unlocking Systems - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 45 Wednesday, December 19, 2007 11:28 AM

Selecting Systems to Scan

To select systems to scan, press Scan then press the quick key assigned to the
system or systems you want to scan. For quick keys [0] - [9], press the quick key's
number. For quick keys 10-99, press [.No] then press the quick key's 2-digit
number. To stop scanning the system(s), press [.No] (if the quick key is a 2-digit
quick key) then the number button or buttons again.
The Sx: (system) indicators on the display show the systems that are currently
selected.
To select or lock out a system that is not assigned to a key, press
the Scroll Control until the desired system is selected. Then, press [L/O] within 2
seconds to either lock out or unlock the system.

Selecting System Channel Groups

Within a system, you can assign groups of channels to a group quick key (see
"Setting the Group Quick Key" on Page 78).
Follow these steps to activate or deactivate a channel group within a system while
scanning.
F
1. Tap then turn the Scroll Control to switch to the Function Mode. Then
to select the system that has the channel group you want to enable or disable.
f
2. While still appears on the display, press the number key corresponding to
the channel group you want to activate or deactivate.

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does not scan even if its quick
key is selected.
F
1. Tap to switch to the Function Mode then rotate the control to select the
desired system.
2. Press [L/O] to temporarily lock out the system. Temporary L/O appears. Or,
quickly press [L/O] twice to permanently lockout the system. Locked Out
appears.
3. To unlock temporarily locked out systems, turn power off and then back on. To
unlock permanently locked out systems, repeat Steps 1 and 2. System
Unlocked appears.
F
then rotate
Operation
45