Band Search; Setting A Search Band - Uniden BCT8 User Manual

Setting a Search Band

The BCT8 can search up to 13 separate frequency ranges to help you discover new stations
in your area.
To set a Search Bands, enter into the Band Search mode.
Band Frequncy Range (MHz)
1
2
3
4
5 108.0000 - 136.9875
6 137.0000 - 143.9950
7 144.0000 - 147.9950
8 148.0000 - 174.0000
9 400.0000 - 419.9875
10 420.0000 - 449.9875
11 450.0000 - 469.9875
12 470.0000 - 512.0000
806.0000 - 823.9875
13 849.0125 - 868.9875
894.0125 - 956.0000
1. Press SRCH. The upper and lower limits of the Bands
currently selected are on the display.
2. Use the L or M key to select the band you want to search.
Wait for about two seconds and the scanner will begin
searching that band. Or press HOLD/RESUME to begin
immediately.
Notes:• You must set the Search Bands prior to any searching.
• The scanner automatically increases its search speed up to 300 steps per second
for bands having 5 kHz steps. (Turbo Search)
• While searching, you can change the search direction by using the L or M key.
Make sure which of icon, "LSRCH" or "SRCHM" appears on the display.

Band Search

25.0000 - 27.9950
28.0000 - 29.7000
30.0000 - 49.9950
50.0000 - 54.0000
Mode Step
AM 5kHz
FM 5kHz
FM 5kHz
FM 5kHz
AM 12.5kHz
FM 5kHz
FM 5kHz
FM 5kHz
FM 12.5kHz
FM 12.5kHz
FM 12.5kHz
FM 12.5kHz
FM 12.5kHz
26
Display
25-28
28-30
30-50
50-54
108-137
137-144
144-148
148-174
400-420
420-450
450-470
470-512
806-956