Specifying The Correct System Type; Programming System Options - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 64 Wednesday, December 19, 2007 11:28 AM

Specifying the Correct System Type

In order for trunk tracking to work properly, you have to specify the correct system
type when you create the system. Here are some tips for selecting the correct
type:
• Use online resources, such as the www.radioreference.com database, to
identify the system type.
• EDACS Wide is the same as EDAC Standard.
• EDACS Networked sites are EDACS Narrow
Following these steps to change the system name.
[MENU]
Program System
Select the system
F
Edit Name
To enter a letter, turn the Scroll Control until the character you want appears. To
enter a decimal point, press [.No]. To move the cursor to the left, press [4]. To
move the cursor to the right, press [6].
To clear a character, press [.No] twice. To clear all characters, press [.No] 3 times.
To accept an entry, press [E

Programming System Options

Editing the System Quick Key
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Quick Key
After selecting this option, select any number from 0-99 to assign the system to a
quick key or press [.No] to assign the system to no quick key, then press
Notes:
• Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
[.No] then both digits.
• You can assign as many systems to the same quick key as you want.
• To be scanned, a system's Quick Key must be activated and the system must
be unlocked.
64
F
F
F
] or .
YES
F
F
F
F
MELCS
C
F
.