Using The Menu - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 50 Wednesday, December 19, 2007 11:28 AM
The UBC800XLT incorporates an effective menu system that lets you make all the
necessary setting options required to program the scanner and effectively use the
many features. To use the menu, press [MENU].
You immediately see the screen display the menu title at the top and three of ten
menu options beneath. Using the Multifunction Scroll Control, you can rotate the
control left or right to quickly review all ten listings.
The depth of each menu selection is extensive. For the purpose of this manual, the
following chart indicates the primary menu selection, the purpose of that selection,
and a reference to the page or pages that provide the details associated with the
option.
Menu Item
Program System
Program Location
Srch/CloCall Opt
Search for...
Close Call
Set Priority
Tone-Out for...
Wired Clone
Settings
50

Using the Menu

Let's You...
Select options related to setting up
a new system or editing one
already programmed.
Choose GPS related locations for
data to alert, confirm location, and
provide you with an audible
warning if desired.
Lets you adjust settings that affect
the scanner during search and
Close Call operation
Choose and search programmed
ranges of desired services
Setup the radio to receive, and let
you hear, nearby strong stations.
Lets you scan a conventional
system and check for designated
priority channels.
Select up to 10 Tone-Out settings
or Standby
Copy data directly from one
UBC800XLT to another
UBC800XLT.
Choose settings for miscellaneous
but convenient options.
For Detail, See...
See "Scanner Programming"
reprint.
See "Search and Close Call
Options" on Page 98
See "Searching and Storing" on
Page 86
See "Using the Close Call Feature"
on Page 94
See "Priority Scan" on Page 103
See "Fire Tone-Out" on Page 105
See "Wired Cloning" on Page 56
See the respective pages for each
option: