Programming Sites - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 71 Wednesday, December 19, 2007 11:28 AM
channel group information for trunked systems, but doing so makes it easier to
follow specific talk groups.
Copying Systems
Occasionally you might want to copy and rename a system to highlight one group
over another.
One system might be called City - Fire and the same system City - PD with
adjustments to data within.
This lets you quickly locate the desired set of data.
To copy a system including all settings, groups, and channels:
[MENU]
Program System
Select the existing system
Copy System
New Sys Name?
Enter your new name using the Scroll Control and [4] and [6] to traverse the
display and enter characters. Press
Deleting Systems
[MENU]
Program System
Select the existing system
Delete System
Confirm Delete?
Yes="E" / No= "."
Important: Deleted systems cannot be restored. You must re-enter them.

Programming Sites

This section covers settings that apply to trunked radio site. You must program at
least one site for each trunked radio system. When you program multiple sites, all
sites share the same channel groups and channels within the system.
Note: You can only program one site in an EDACS SCAT and LTR system.
Setting the Site Name
Each site name can be up to 16 characters. Abbreviate as necessary to fit. The
site name alternates with the Channel group when the scanner stops on a
channel.
F
F
F
F
when finished.
F
F
F
MECSL
MECSL
MESL
Programming Your Scanner
ME
71