Advanced Programming; Cloning Your Scanner - Radio Shack 20-136 Owner's Manual

Advanced Programming

Advanced Programming
You can clone your scanner by transferring the programmed data to or from
another PRO-136 scanner using a connecting cable. You can also upload or
download programmed data from a PC through wired programming.

Cloning Your Scanner

You can clone all the frequencies in
your PRO-136 to another PRO-136 or
PRO-135 using an optional interface
cable with 1/8-inch phone plugs on
both ends.
1. Make sure the scanners are turned
off and then plug the cable into
each scanner's PC/IF jack.
2. Turn on both scanners. WirEd and PGM appear.
3. Press or
This is the "master unit." The receiving scanner is the "slave unit."
4. Press ENT/PROGRAM on the master unit to send the data. SEnd and the
transfer progress are displayed in the master unit.
on the scanner from which you want to send frequencies.
BANK0 1 2 3
PC/IF Jack
PGM
PGM
22