Setting The Signal Stalker Options - Radio Shack PRO-83 User Manual

Signal Stalker might not find the transmission
you are searching for, or it might find a
transmission other than the one you are
searching for. You can screen unwanted
transmissions by pressing FUNC + L/O to lock
them out. See "Locking Out Frequencies" on
Page 49 for more information.
• Signal Stalker cannot detect satellite dishes or
any transmitter with a frequency above or below
the frequency ranges listed under "Setting the
Signal Stalker Options" on Page 32.
• Signal Stalker works better with some types of
transmissions than others. It might not correctly
display frequency information for transmitters
using a highly directive antenna (such as an
amateur radio beam antenna), if there are many
transmitters operating at the same time in the
same area, or if the transmitter is a broadcast
television station.

Setting the Signal Stalker Options

Press FUNC then press and hold
seconds. One of the following signal stalker
options appears.
S-S.bnd: Lets you select the signal stalker band.
S-S.ALt: Lets you select the signal stalker alert
settings.
Beyond the Basics
for 2
32