Searching; Seek Search - Radio Shack Pro-164 Manual

The.application.software.is.also.available.online.
at.www.starrsoft.com.and.www.scancat.com.
To clone the scanner data:
1.. Turn.on.both.scanners.
PC/IF.—.PC.interface.
cable.for.use.with.
your.computer.
2.. Connect.the.connecting.cable.
to.each.scanner's.PC/IF.jack..**.
CLONE.MODE.**.appears.
3.. Press.. "Confirm to send data?" appears.
4.. Press.1.to.send.the.data.to.the.other.unit.or.
press.any.other.key.to.cancel..
5.. To.exit.the.clone.mode,.remove.the.cable.
"CLONE MODE Incorrect Model" appears
if you connect a scanner other than a
PRO-164 (or PRO-163).

Searching

You.can.search.for.transmissions.using.the.
preprogrammed.search.bank,.which.is.divided.
into.eight.search.bands..

Seek Search

When.Seek.Search.is.active,.the.scanner.stops.
on active frequencies for five seconds and then
resumes.searching.automatically..
To activate Seek Search:
1.. Press.FUNC.then.7.."Seek.Search.ON".
appears briefly and "S" appears on the
1
display.
2.. To.turn.off.Se
again. "Seek
Search Bank
To search prepro
1.. Press.SRCH.r
Bank Band
SR0 Marin
SR1 CB
SR2 FRS/G
SR3 Public
SR4 Aircra
SR5 Amate
SR6 Railro
SR7 Limit.s
.
For.SR0-SR2,
channel.or.se
. SR3.to.SR5.b
To.turn.off.a.g
number;.the.g
turn.the.grou
number.again
2.. Adjust.the.Sq
scanner.starts
finds an activ
3.. To.pause.whi
scanner.stops
***.appears..
4
.. If.the.scanner
frequency,.yo
the.frequency