Installing The Software - Roland GX-24 User Manual

3-2 If You're Using a Windows

Installing the Software

Installing the Driver
Never make the connection to the computer before installing.
Keep the machine and the computer unconnected until you carry out this installation operation. Failure to follow
the correct procedure may make installation impossible.
p 30 "What to Do If Installation Is Impossible"
Before you start installation and setup, make sure the USB cable is not connected.
Log on to Windows. If you are installing under Windows 2000/XP, log on as "Administrators" right.
Follow the instructions in the Installation and Setup Guide to finish installing.
If the [Driver Setup] Window Doesn't Appear
If you're using Windows 98 SE, Windows Me, or Windows 2000 and the Setup program doesn't appear, first check
the taskbar at the bottom of the screen. If [Driver Setup] is displayed, the program is running. Go to the taskbar
and click [Driver Setup] to display the window for the Setup program.
28 Chapter 3: Installing/Uninstalling Software
Installation and Setup Guide
Taskbar
Insert the included CD-ROM into the CD-ROM
drive.
After a short wait, the setup menu shown at left ap-
pears.
Click this.
The Installation and Setup Guide appears.
If you're using Windows 98 SE, Windows Me, or Win-
dows 2000, the Installation and Setup Guide and the
Setup program appear.
Setup program
(Windows 98 SE/Me/2000)
Click this.