Uninstalling The Driver - Roland GX-24 User Manual

3-2 If You're Using a Windows

Uninstalling the Driver

When uninstalling the driver, perform following operation.
Procedure
Before you start uninstallation of the driver, unplug the USB cables from your computer.
Log on to Windows. If you are installing under Windows 2000/XP, log on as "Administrators" right.
Insert the included CD-ROM into the CD-ROM drive.
The setup menu appears.
Go to the upper right and click the [X] to close the setup menu.
In this illustration, drive D is specified
as the CD-ROM drive.
32 Chapter 3: Installing/Uninstalling Software
From the [Start] menu, click [Run].
The screen shown at left appears.
For [Open], type in the information shown below, then click
[OK].
Windows 2000/XP
(CD-ROM drive letter ):\Drivers\WIN2KXP\SETUP.EXE
Windows 98 SE/Me
(CD-ROM drive letter):\Drivers\WIN9X\SETUP.EXE
The Setup program starts and the [Driver Setup] window appears.
Choose [Uninstall].
Choose [Roland GX-24].
Click [Start].
Click [Yes] to restart the computer.