Configuring Country Codes; Finding Feature Information; Prerequisites For Configuring Country Codes - Cisco IOS XE Release 3SE Configuration Manual

Configuring Country Codes

•
•
•
•
•

Finding Feature Information

Prerequisites for Configuring Country Codes

• Generally, you configure one country code per switch; you configure one code that matches the physical
• When the multiple-country feature is used, all switchs that are going to join the same RF group must be
• Access points are capable of using all the available legal frequencies. However, access points are assigned
• The country list configured on the RF group leader determines which channels the members would
• For switchs in the Japan regulatory domain, you must have had one or more Japan country codes (JP,
• For switchs in the Japan regulatory domain, you must have at least one access point with a -J regulatory
OL-28697-01
Finding Feature Information, page 75
Prerequisites for Configuring Country Codes, page 75
Information About Configuring Country Codes, page 76
How to Configure Country Codes (CLI), page 76
Configuration Examples for Configuring Country Codes, page 79
location of the switch and its access points. You can configure up to 20 country codes per switch. This
multiple-country support enables you to manage access points in various countries from a single switch.
configured with the same set of countries, configured in the same order.
to the frequencies that are supported in their relevant domains.
operate on. This list is independent of which countries have been configured on the RF group members.
J2, or J3) configured on your switch at the time you last booted your switch.
domain joined to your switch.
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
12
C H A P T E R
75