Cisco IOS XE Release 3SE Configuration Manual page 26

Web GUI Features
wireless configuration. Start the wizard through Configuration -> Wizard and follow the nine-step process to
configure the following:
• Admin Users
• SNMP System Summary
• Management Port
• Wireless Management
• RF Mobility and Country code
• Mobility configuration
• WLANs
• 802.11 Configuration
• Set Time
The Monitor tab:
• Displays summary details of switch, clients, and access points.
• Displays all radio and AP join statistics.
• Displays air quality on access points.
• Displays list of all Cisco Discovery Protocol (CDP) neighbors on all interfaces and the CDP traffic
information.
• Displays all rogue access points based on their classification-friendly, malicious, ad hoc, classified, and
unclassified.
The Configuration tab:
• Enables you to configure the switch for all initial operation using the web Configuration Wizard. The
wizard allows you to configure user details, management interface, and so on.
• Enables you to configure the system, internal DHCP server, management, and mobility management
parameters.
• Enables you to configure the switch, WLAN, and radios.
• Enables you to configure and set security policies on your switch.
• Enables you to access the switch operating system software management commands.
The Administration tab enables you to configure system logs.
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
14
Using the Web Graphical User Interface
OL-28697-01