Configuring Data Encryption; Finding Feature Information; Prerequisites For Configuring Data Encryption; Restrictions For Configuring Data Encryption - Cisco IOS XE Release 3SE Configuration Manual

Configuring Data Encryption

•
•
•
•
•
•

Finding Feature Information

Prerequisites for Configuring Data Encryption

• Cisco 1260, 3500, 3600, 801, 1140, 1310, and 1520 series access points support Datagram Transport
• You can use the switch to enable or disable DTLS data encryption for a specific access point or for all
• Non-Russian customers who use the Cisco switch do not need a data DTLS license.

Restrictions for Configuring Data Encryption

• Encryption limits throughput at both the switch and the access point, and maximum throughput is desired
• If your switch does not have a data DTLS license and if the access point associated with the switch has
• In images that do not have a DTLS license, the DTLS commands are not available.
OL-28697-01
Finding Feature Information, page 27
Prerequisites for Configuring Data Encryption, page 27
Restrictions for Configuring Data Encryption, page 27
Information About Data Encryption, page 28
How to Configure Data Encryption, page 28
Configuration Examples for Configuring Data Encryption, page 29
Layer Security (DTLS) data encryption.
access points.
for most enterprise networks.
DTLS enabled, the data path will be unencrypted.
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
4
C H A P T E R
27