Editing Commands Through Keystrokes - Cisco IOS XE Release 3SE Configuration Manual

Enabling and Disabling Editing Features
Command or Action
Step 2
terminal no editing
Example:
Switch# terminal no editing

Editing Commands Through Keystrokes

The keystrokes help you to edit the command lines. These keystrokes are optional.
Note The arrow keys function only on ANSI-compatible terminals such as VT100s.
Table 3: Editing Commands
Editing Commands
Ctrl-B or use the left arrow key
Ctrl-F or use the right arrow key
Ctrl-A
Ctrl-E
Esc B
Esc F
Ctrl-T
Delete or Backspace key
Ctrl-D
Ctrl-K
Ctrl-U or Ctrl-X
Ctrl-W
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
8
Purpose
Disables the enhanced editing mode for the current terminal
session in privileged EXEC mode.
Description
Moves the cursor back one character.
Moves the cursor forward one character.
Moves the cursor to the beginning of the command
line.
Moves the cursor to the end of the command line.
Moves the cursor back one word.
Moves the cursor forward one word.
Transposes the character to the left of the cursor with
the character located at the cursor.
Erases the character to the left of the cursor.
Deletes the character at the cursor.
Deletes all characters from the cursor to the end of
the command line.
Deletes all characters from the cursor to the beginning
of the command line.
Deletes the word to the left of the cursor.
Using the Command-Line Interface
OL-28697-01