Options; Adjusting The Display; Changing The Auto-Off Setting; Using Usb Audio (Usb Driver Mode) - Roland TD-25 Parameter Manual

Setup

Options

Here you can make overall settings for the entire TD-25.

Adjusting the Display

Parameter Explanation
LCD Contrast Adjusts the contrast of the display (Default: 12).
LCD Brightness Adjusts the brightness of the display (Default: 8).

Changing the Auto-Off Setting

The TD-25 automatically powers-off when a certain length of time has elapsed since it was last operated
or played.
With the factory settings, this is set to "4 HOURS. "
* Thirty minutes before the power turns off, a message will appear in the display.
Parameter Explanation
OFF
Auto Off
4 HOURS

Using USB Audio (USB Driver Mode)

This switches the USB driver mode that's used when the TD-25 is connected to a computer via USB.
After changing this setting, you must power the TD-25 off and then on again.
Paramenter Value
GENERIC
USB Driver
VENDOR
You can download the dedicated driver for the TD-25 from the Roland website.
http://www.roland.com/support/
For the operating requirements, refer to the Roland website. The driver program and installation
procedure will differ depending on your system. Please carefully read the "Readme.htm" included with
the files you downloaded.
The power will not turn off automatically.
The power will turn off automatically when four hours have elapsed.
Operation Driver Explanation
Choose this if you want to transfer
USB-MIDI Not required MIDI messages between the TD-25
and your computer or iPad.
Choose this if you want to transfer
USB-AUDIO
Required audio between the TD-25 and your
USB-MIDI
computer.

Click

Here you can specify click settings.

Adjusting the Click

Parameter Explanation
Beat Time signature
Pattern
Click interval
Sound Tone
Volume Volume
Pan Panning
11