Zone2 Setup - Denon AVR-2112CI Owner's Manual

Setting items
Other Notification : Sets the display of a notification message when the latest
(Continued) firmware is released.
Update : Displays a notification message on this unit's menu screen when
the latest firmware is released with "Firmware Update". The notification
message is displayed for about 20 seconds when the power is turned on.
Connect to broadband Internet (vpage 12) when using this function.
ON : Display update message.
OFF : Do not display update message.
When you press
notification message, the "Check for Update"
screen is displayed (Refer to
information on "Firmware Update").
RETURN B
Press
message.
Upgrade : Display a notification message on this unit's menu screen
when downloadable firmware is released with "Add New Feature". The
notification message is displayed for about 20 seconds when the power
is turned on. Connect to broadband Internet
this function.
ON : Display upgrade message.
OFF : Do not display upgrade message.
When you press
"Add New Feature" screen is displayed (Refer to
information on "Add New Feature").
RETURN B
Press
Rhapsody Account Username / Password / Clear
Set or change Username For character input, see page 76.
and Password
(vpage 42 "Listening to
Rhapsody").
Napster Account Username / Password / Clear
Set or change Username For character input, see page 76.
and Password
(vpage 37 "Listening to
Napster").
Network Info. Friendly Name / DHCP=ON or OFF / IP Address / MAC Address
Display network information.
Setting details
ENTER
during display of the
page 96 for more
to erase the notification
(vpage 12) when using
ENTER
during display of the notification message, the
page 97
to erase the notification message.

ZONE2 Setup

Set the audio to play back with multi-zone (ZONE2).
"ZONE2 Setup" is displayed when "ZONE2" is selected with "Amp Assign".
Setting items
Lch Level
Adjust the left channel
output level.
Rch Level
Adjust the right channel
output level.
Volume Limit
Make a setting for
maximum volume.
Power On Level
Define the volume setting
that is active when the
power is turned on.
Mute Level
Set the amount of
attenuation when muting
is on.
for more
94
Default settings are underlined.
Setting details
–12dB – +12dB (0dB)
–12dB – +12dB (0dB)
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
This is displayed from 0 to 99 when "Volume Display" (vpage 95)
is set to "Absolute".
Last : Use the memorized setting from the last session.
– – – (0) : Always mute when power is turned on.
–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
This is displayed from 0 to 99 when "Volume Display" (vpage 95)
is set to "Absolute".
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
System Setup