Denon AVR-2112CI Owner's Manual page 96

Setting items
Other Network Standby : Set the network function on/off during standby.
Network function on/off ON : Network is on during standby. Main unit operable with a network
compatible controller.
setting during standby, and
OFF : Suspend network function during standby.
PC language setting.
Set to "ON" when using the web control function.
NOTE
When "Other" – "Network Standby" is set to "ON", it consumes
more standby power.
Character : When characters are not displayed correctly, set the MP3 ID3-
Tag character code type reproduced by the USB memory device.
Auto : Auto-select character code.
Latin : Select ISO 8859-1 Latin-1.
Japanese : Select Shift-JIS.
If the characters are not properly displayed when set to "Auto", set to
"Latin" or "Japanese".
PC Language : Select computer environment language.
Arabic / Chinese(simplified) / Chinese(traditional) / Czech / Danish /
Dutch / English / Finnish / French / German / Greek / Hebrew /
Hungarian / Italian / Japanese / Korean / Norwegian / Polish /
Portuguese / Portuguese(Brazil) / Russian / Spanish / Swedish /
Turkish
Friendly Name : The Friendly Name is the name of this unit displayed on
the network. Up to 63 characters can be input. The default Friendly Name
on first use is "DENON:[AVR-2112CI]".
For character input, see page 76.
Default : Restores Friendly Name, which you had changed, to the default
setting.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
When you select "Default" and press
the "Return settings to the default?" prompt
is displayed. Select either "Yes" or "No", and
ENTER
press
Setting details
ENTER
,
.
Setting items
Other Party Mode : Set the Party Mode.
(Continued)
Party Mode : Set the Party Mode function.
ON : Enable party mode function.
OFF : Disable party mode function.
Refer to
the party mode function.
Party Start Lev. : Make settings for volume level when the party mode
is started.
Last : The same volume as set before the party mode was started.
– – – (0) : Always use the muting on condition when the party mode is
started.
–80dB – 18dB (1 – 99) : Start party mode with your preferred volume.
This can be set when "Party Mode" is set to "ON".
This is displayed from 0 to 99 when "Volume Display"
is set to "Absolute".
You can set to the upper limit set with "Volume Limit" (vpage 95) .
Zone Management : See "Zone Management function" (vpage 66).
93
Setting details
page 65, "Party mode function" for more information on
vSee overleaf
System Setup
(vpage 95)