Denon AVR-2112CI Owner's Manual page 99

Setting items
GUI NET/USB : Set the NET/USB screen display time when the input source
(Continued) is "NET/USB".
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
Tuner : Set the tuner screen display time when the input source is
"Tuner".
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "DOCK"
or "iPod (USB)".
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
Remote Setup Guide See "Registering preset codes" (vpage 106).
Search a preset code to
register in the remote
control unit.
Quick Sel.Name Up to 16 characters can be input.
Change the "Quick Select" For character input, see page 76.
display title to one you
prefer.
Zone Rename Up to 10 characters can be input.
Change the display title of For character input, see page 76.
each zone to one you prefer.
Dimmer Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
Buttons on the main unit can be used for operations.
Each time
below.
Setting details
DIMMER
is pressed, the setting is changed as shown
Bright Dim
OFF Dark
Setting items
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
Menu operations
Firmware Update Check for Update : Check for firmware updates. You can also check
Update the firmware of the approximately how long it will take to complete an update.
receiver. Start : Execute the update process.
When updating starts, the power indicator becomes red and the menu
screen is shut down. The amount of update time which has elapsed is
displayed.
When updating is complete, the power indicator becomes green and
normal status is resumed.
If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display
reads as shown below, check the settings and network environment,
then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
96
System Setup
Setting details
Channel Level
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
vSee overleaf