General; Language; Zone2 Setup - Denon AVR-X3000 Owner's Manual

Contents

General

Make various other settings.

Language

Set the language for display the menu on the TV screen.
English (Default) / Deutsch / Français / Italiano / Español / Nederlands /
Svenska / / Polski
%
• "Language" can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3
seconds.
"V.Format:<PAL>" appears on the display.
2. Press the main unit's DIMMER.
"Lang.:<ENGLISH >" appears on the display.
3. Use the main unit's TUNER PRESET CH +, – and set the language.
4. Press the main unit's STATUS to complete the setting.
Front panel Display
Connections Playback
Rear panel
Settings

ZONE2 Setup

Set the audio to play back with multi-zone (ZONE2).
%
• Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale" (vpage 135).
2 Bass
Adjust bass.
–10dB – +10dB (Default : 0dB)
2 Treble
Adjust treble.
–10dB – +10dB (Default : 0dB)
2 High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On : The low range is attenuated.
Off (Default) : The low range is not attenuated.
169
Remote
Tips Appendix
Index