Connect - Denon AVR-2112CI Owner's Manual

Connect

For the method of connecting 5.1-channel speakers, see
C page 3 "Connect this unit to the television using an HDMI
For the method of connecting the TV, see
cable (sold separately)".
7.1-channel (Surround back speaker) connection
The illustration on the right shows a connection example for performing 7.1-channel playback using the
surround back speakers.
If you connect the surround back and front height speakers before you start playback, the audio is played
back by automatically switching the speakers in accordance with the surround mode or input signals.
To perform 7.1-channel playback using the surround back speakers, set "Amp Assign" to "NORMAL" in
steps 3 and 4 for "Set up "Amp Assign"" (vpage 58).
NOTE
C page 6 "Connecting the
For speaker cable connections, see
Connect so that the speaker cable core wires do not protrude from the speaker terminal. The
protection circuit may be activated if the core wires touch the rear panel or if the + and – sides
touch each other (vpage 124 "Protection Circuit").
Never touch the speaker terminals while the power supply is connected. Doing so could result
in electric shock. (When the Setup wizard is running, follow the instructions in the Setup wizard
screen for making connections.)
Use speakers with the speaker impedances shown below.
Speaker terminals
FRONT
CENTER
SURROUND
SURR. BACK / AMP ASSIGN
C page 6 "Connecting the
speakers".
speakers".
Speaker impedance
6 – 16 Ω
FL
SW
SL
SBL
53
FR
C
SR
SBR