7.1-channel (Front height speaker) connection
The illustration on the right shows a connection example for performing 7.1-channel playback using the
front height speakers.
If you connect the surround back and front height speakers before you start playback, the audio is played
back by automatically switching the speakers in accordance with the surround mode or input signals.
To perform 7.1-channel playback using the front height speaker, set "Amp Assign" to "F.HEIGHT" in steps
3 and 4 for "Set up "Amp Assign"" (vpage 58).
NOTE
C page 6 "Connecting the
For speaker cable connections, see
For speaker impedance, see
page 53.
speakers".
54
FHL
FL
SW
C
SL
Connect
FHR
FR
SR