8.0 Control Functions
8.1 Control Panel
A. LED Display: Can
display current water
temperature (default
display), water tempera-
ture set point, selected
skimming/heating
mode, and error mes-
sages.
B. Warmer ( + ) Button:
Increases water tem-
perature set point.
C. Cooler ( - ) Button: Decreases water temperature set point.
D. Light Button: Controls Spa Light See Section 9.3, page 22
E. Jets 1 Button: Turns jets pump # on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump off.
F.
Jets 2 Button: turns high-speed jets pump #2 on and off. Press
once to turn on; press a second time to turn pump off (2-pump mod-
els only).
G. Heat Indicator: Lit when heater is on.
Operation Details
•
Temperature Adjustment: 65 to 04°F (8 to 40°C). Factory default
setting is 00°F (38°C).
•
Underwater Light operation: Light runs for hour then shuts off.
•
Jets 1/Jets 2 Button operation: Jets run for 20 minutes after
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
Page 8
A
B
C
2 Pump Control Panel Shown
2-Pump Control Panel Shown.
G
F
E
D