Pillow Care; Maintaining The Cover; Maintaining The Synthetic Cabinet - Jacuzzi J-315 Owner's Manual

left on the surface. This could cause severe sudsing when the spa is
refilled.

11.4 Pillow Care

Remove and clean the headrest pillows as needed with soapy water
using a cloth or soft-bristle brush. To maintain water resistance and
luster, apply a quality vinyl conditioner once a month. Always remove
the pillows when adding chemical shock treatment to the spa water.
When the sanitizer reading is below 5 ppm, pillows can be reinstalled.
CAUTION: Never attempt to remove the pillows by pulling on
the complete assembly! The pillows utilize a bolt-on design that
prohibits removal without tools.
To remove pillows:
. Grasp pillow insert (A) with finger
tips and gently pry outward from
pillow base (C).
2. Use a standard screwdriver to
loosen and remove mounting bolts
(B) from pillow base.
3. Assemble in reverse order after
cleaning. DO NOT overtighten
pillow mounting bolts!

11.5 Maintaining The Cover

Using the Jacuzzi insulating spa cover anytime the spa is not in use will
significantly reduce your operating costs, heat-up time and maintenance
requirements. To prolong the life of the cover, handle it with care and
clean it regularly using mild soap and water. Periodic treatments with
a special conditioner developed for Jacuzzi spa covers, will help pro-
tect against deterioration caused by UV rays from the sun. Never allow
anyone to stand or sit on the cover, and avoid dragging it across rough
surfaces.

11.6 Maintaining The Synthetic Cabinet

Your new Jacuzzi synthetic spa cabinet requires little or no mainte-
nance of any kind. To clean, simply wipe cabinet with a clean towel and
mild soap solution.
Page 3