To Put More Than One Call On Hold - 3Com 2101 Telephone Manual

1 Press the Hold button.
2 To obtain dial tone to make the second call:
3 When you hear dial tone, dial the second call.
To Put More Than
One Call on Hold
1 To place the current call on hold, press the Hold button.
2 Make or receive a new call:
3 To place the new call on hold, press the Hold button.
4 To return to either call, press the appropriate Access button.
5 To place or receive another new call, repeat the previous steps.
1 Press the Hold button.
2 Make or receive a new call:
On an NBX Basic Telephone:
If you DID NOT hang up the handset, press and release the hook
■
switch.
If you DID hang up the handset, pick it up again.
■
To place more than one call on hold:
On an NBX Business Telephone:
To make a call, press one of the Access buttons that is currently not
■
being used and when you hear dial tone, dial the call.
To receive a call, locate the flashing status light that indicates the
■
incoming call and press the associated Access button.
The number of simultaneous calls that you can have on your NBX
Business Telephone is limited by the number of Access buttons defined
for your extension. The default is the three buttons at the bottom of the
row on the right side of your telephone. Your administrator can verify the
number and location on your telephone.
On an NBX Basic Telephone
To obtain dial tone and make a second call:
■
If you DID NOT hang up the handset, press and release the hook
■
switch.
If you DID hang up the handset, pick it up again.
■
When you hear dial tone, dial the second call.
Putting a Call on Hold 45