Paging; Dialing A Call To A Remote Office; Using Unique Extensions - 3Com 2101 Telephone Manual

Paging

Table 13 Paging Extension
Feature
External Paging
Broadcast an announcement over a public address
system that has a paging amplifier and speaker
system that is connected to your NBX system
Internal Paging
Broadcast an announcement through the speakers
on all NBX
Simultaneous Paging
Broadcast an announcement externally and
internally at the same time
Dialing a Call to a
Remote Office
Using Unique
Extensions
b From an NBX Basic Telephone, press the hook switch. When you hear
the dial tone, dial the user's extension, or use the paging feature. See
"Paging" next for details.
To retrieve a parked call:
1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension that was assigned to the call.
Depending on your location and equipment, you can broadcast a
message in one of three ways, as described in
1 Pick up the handset.
2 Dial the paging extension as shown in
3 Speak into the NBX Telephone handset and then hang up.
Do not press the Feature button before you dial the Paging extension.
® Telephones on your system
You can dial calls between sites that are separated geographically but
that are linked by a Wide Area Network (WAN) connection. Typical
configurations are described in the next sections.
In the sample network shown in
telephone extensions. Whenever you make a call to an extension not
located at your own site, your NBX system sets up a connection to the
appropriate site.
Table 13.
Table 13).
NBX 100
(default extension)
620
621
622
Figure 6, each site must have unique
Paging 73
SuperStack 3 NBX
(default extensions)
6200
6201
6202