Paper Tray Attributes - Xerox 4112 System Administration Manual

• Forwarding via SMB
Example: To save the aaa directory with a specified volume (UNC format) in to the bbb
directory (aaa\bbb).
User Name
When a login name is required to be input by the forwarding destination server, set the login
name. For the login name, you can enter a maximum of 32 characters.
Password
When a password is required to be input by the forwarding destination server, set the
password. For the password, you can enter a maximum of 32 characters.
Port Number
Set the forwarding destination port number. Input a number in the range 1 to 65535.
When the Delete Entry button is selected
This deletes all registered information for the selected address book entry. To delete all
registered information for the selected address book entry, select Delete.
Tip
Deleted information cannot be recovered.

Paper Tray Attributes

Note
The Paper Tray Attributes appear in the Setup menu when enabled in Paper Tray Settings. See
Chapter 9 Paper Tray Attributes on Setup Menu on page 9-29.
For setting the Paper Tray Attributes see Paper Tray Attributes on page 9-25.
Xerox 4112/4127 Copier/Printer
System Administration Guide
Setups
9-171