Setups
These buttons appear on the Edge Erase screen, which can be found by accessing the Copy
feature, Layout Adjustment tab.The following screen is displayed:
Edge Erase
preset
buttons
Copy Defaults
From this screen, you can select the default settings for the various copy features. Selections
made here are displayed on the Copy screen.
When the power is switched on, when the machine exits the power-saving mode, or when the
Clear All button is pressed, these default settings are displayed. By assigning default values to
commonly used features, you reduce the number of selections when choosing features for the
copy process.
Use the following procedure for selecting the various Copy Defaults.
1. From the Copy Service Settings screen, select Copy Defaults.
2. Select the item to be set or changed, and select Change Settings.
Note
Select
to display the previous screen and select
Note
Each of the items shown in the above illustration is discussed on the following pages.
9-94
System Administration Guide
Xerox 4112/4127 Copier/Printer
to display the next screen.