Xerox 4112 System Administration Manual page 219

3. Select the tray in which you loaded paper, and press the Start button.
An output sample is printed.
4. Press Close.
5. Check the output sample printout, and measure the offset amount.
6. Select Long at Left or Long at Right.
7. Enter the measurement value you obtained in Step 5 in Values A Before Adjustment field
by touching the up/down arrow buttons; refer to the screen above.
8. Press Adjust.
9. Press Sample Printout again to print an output sample printout, and check the adjustment
results.
10. Make adjustments again if necessary. (Steps 6 - 8)
11. Press Save.
Xerox 4112/4127 Copier/Printer
System Administration Guide
Setups
9-61