Accessing The User Tools (System Settings) - Ricoh 9922DP System Settings

User Tools (System Settings)

Accessing the User Tools (System Settings)

This section is for the key operators in
charge of this machine. You can
change or set the machine's default
settings.
2
Preparation
After using the user tools, be sure
to return to Copy mode.
The settings are not canceled even
if the operation switch is turned off
or the {Clear Modes} key is pressed.
Reference
For information on Copy, Fax, and
Printer User Tools, see the appro-
priate reference manual.
A
Press the {User Tools/Counter} key.
The User Tools Main Menu ap-
pears.
B
Enter {1} with the Numberkeys.
The system settings menu appears.
Note
Press the [Counter] key to view
the total number of prints made
by the machine. See
"Printing the Counter Value".
Press the [Language] key to
switch the display language.
14
C
Search for the desired menu with
the [ Next] or [ Prev.] key. Then
enter its number with the Number
keys.
Note
[ Next]: Press to go to the next
page.
[ Prev.]: Press to go back to the
previous page.
P.15
Reference
P.16 "User Tools Menu (Sys-
tem Settings)"